User manual SANUS VISIONMOUNT LCD WALL MOUNT-VM400

[. . . ] (6901-170006 <01>) IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Thank you for choosing the Sanus VM400 wall mount. The Sanus VM400 wall mount is designed to support a monitor weighing up to 45 kg (100 lbs). [. . . ] EN Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Tighten the lag bolts only until they are pulled firmly against the wall plate [01]. EN Install Safety Bolts For added security, install a lock through the hole [A]. EN Install Preventor Install the preventer [03] on the left side if you want the arm to fold to the left. EN Install Cable Management NOTE: Be sure to leave enough slack in the cables to allow the monitor to move freely. Remove the safety bracket [B] only to adjust the swivel tension nut [C]. Be sure to replace the safety bracket after adjusting the swivel tension nut. The hex hole in the safety bracket must seat over the swivel tension nut. Do not remove the adjustment nuts [E]; tighten or loosen only as necessary for easy arm adjustment. [. . . ] milestone makes no representation of warranty , expressed or implied , regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. [. . . ]