User manual SANUS VISIONMOUNT LCD CEILING MOUNT-MC1A

[. . . ] WARNING Do not use this product for any purpose not explicitly specified by Sanus Systems. [. . . ] Failure to provide adequate structural strength may result in serious personal injury or damage to equipment. CAuTION To avoid personal injury or property damage, tighten the lag bolts [07] only until the lag bolt washers [08] are pulled tightly against the ceiling plate on the pillar [01]. CAuTION To prevent property damage or personal injury, do not adjust the pillar [H] height with a TV or monitor attached. If the hole pattern on the back of your TV or monitor is larger than the hole pattern on the head [03], remove the small plate and replace it with the large plate [04]. 6-1: TV or monitor with flat back Determine the diameter bolt required--[10], [11], or [12]--by threading each size bolt into the back of the TV or monitor. 6-2: TV or monitor with curved back or obstruction Determine the diameter bolt required--[13], [14], or [15]--by threading each size bolt into the back of the TV or monitor. Leave some slack in the cables to allow easy movement of the TV or monitor and to prevent excess tension on the connectors. And its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. [. . . ] CSAV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. [. . . ]