User manual SANUS VISIONMOUNT FLAT PANEL WALL MOUNT-VMAA18

[. . . ] The Sanus VMAA18 wall mount is designed to support a monitor sized up to 50 in. WARNING This product contains small items that could be a choking hazard if swallowed. [. . . ] Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Customer Service. E to Wall This product must only be used with wood studs Tighten only until the washer [06] is pulled firmly against the wall plate [01]. Install the preventer [10] on the left side if you want the arm to fold to the left. NOTE Be sure to leave enough slack in the cables to allow the monitor to move freely. Remove the safety bracket [B] only to adjust the swivel tension nut [C]. Be sure to replace the safety bracket after adjusting the swivel tension nut. The hex hole in the safety bracket must seat over the swivel tension nut. Do not remove the adjustment nut [E]; tighten or loosen only as necessary for easy arm adjustment. And its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. [. . . ] milestone makes no representation of warranty , expressed or implied , regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. [. . . ]