User manual SANUS PLATINUM FURNITURE PLASMADLP STAND-PFPL

[. . . ] PLATINUM FURNITURE MODEL PFPL Assembly Instructions - Digital TV Stand BUS5305 Congratulations and thank you for purchasing your new Sanus Platinum Furniture Product. [. . . ] Fasten 8 Connector Rods into small holes in Top as shown. Intersecting hole Important: *When fitting the rails onto the top, ensure that the grooved part of the rails are closest to the side edges of the top. * The larger holes (cam holes) in the rails must always be closest to the Top. 1. Insert black Barrel Nuts into smaller holes in Rails, ensuring slot in cap is aligned to intersecting hole. Insert silver Cams into larger holes in Rails, ensuring that arrow on Cam points towards intersecting hole. With assistance align Base onto Dowels in Sides & Rails & then press fit. Fasten large Locking screws through Base into Sides & Rails ( Screw heads should be flush with surface). Following steps apply to both flat and curved front designs. Glide x6 Screw x6 1. Screw each Adjusting screw into Side by half of it's visible threaded length, then once this is done, tighten all 4 Adjusting screws fully into Side. Curved edge of the glass shelves must be placed at front for curved front design . [. . . ] The manufacturers will not be held liable for damage caused when furniture is shifted without first removing its contents. [. . . ]