User manual SANUS JAVA FURNITURE-JFA36

[. . . ] Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800. Check carefully to make sure that there are no missing or defective parts. [. . . ] Step 2: Add Side Panels Orient the Side Panels (s, t) so the notch is facing the ground and the shelf holes are facing each other. Insert a Dowel (c) into each hole (closest to the center in the bottom of each Side Panel). Insert a Base Bolt (g) through the Bottom (p) and into each Side Panel. Tighten each Cam that corresponds with a Cam Pin in a clockwise motion to secure the Rails together. Step 4: Add Base Assembly to Bottom Align the assembled base frame so the holes line up with the Dowels (c) and Cam Pins (b) on the Bottom (p). Step 6: Add Door Latch Attach the Door Latch (m) to the Top (o) with the four Latch Screws (n). Insert a Cam Pin (b) into each threaded hole and insert a Dowel (c) into each adjacent hole in the Top (o). Make sure the arrow on each Cam points toward the appropriate Cam Pin in the Top (o). Insert the Door (u) into the base so the pivot side is opposite from the Door Latch (m). Fit the Top onto the Side Panels so the Cam Pins correspond with the Cams and the Door is secured in the top. [. . . ] Étape 1 : Montage des axes de came et des goujons sur la base Vissez un axe de came (b) dans chaque trou fileté et insérez un goujon (c) dans chaque trou adjacent du panneau inférieur (p). Veillez à ce que la flèche sur chaque came pointe vers l'axe de came correspondante dans le panneau supérieur (o). [. . . ]