User manual SANUS JAVA FURNITURE-FLAT PANEL TV RAILS

[. . . ] Assembly Instructions for Flat Panel TV Rails These Assembly Instructions are required only if you are going to mount a Flat Panel TV to your piece of JAVA Furniture using the VMPL or VMPL2 Universal Wall Mount from Sanus Systems. [. . . ] Required Parts and Hardware: (4) M8 Bolt - a (4) M8 Nut - b *Packaged with the VMPL or VMPL2 (4)M8 Lock Washer - c (2) Mounting Rail - d (1) Wall Plate - e* a b c d e Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11. 11. 04 Customer Service: 800. 359. 5520. See complementary Sanus products at www. sanus. com Step 1: Attach the Mounting Rails (d) to the assembled piece of Java Furniture by sliding the holes in the Rail over the Rail Bolts as seen in the Detailed View of Diagram 1. Once the Rail Bolt is through the hole on the Mounting Rail, let the bottom of the rail rest on the floor as shown in Diagram 1. Proceed to tighten the Rail Bolts with a phillips screw driver so the Mounting Rails are secured!Diagram 1 d Detailed View Rail Bolt Step 2: Attach the Wall Plate (e) to the Mounting Rails (d) by threading an M8 Bolt (a) through an M8 Lock Washer (c), the Wall Plate, a hole in the Mounting Rails, and into an M8 Nut (b) as shown in the Detailed View of Diagram 2. The different holes in the Mounting Rails determine the height of your television. [. . . ] Step 3: For Assistance with how to mount the Monitor Brackets to your Flat Panel TV, see the assebmly instructions for the VMPL Universal Wall Mount. Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11. 11. 04 Customer Service: 800. 359. 5520. [. . . ]