User manual SANUS FFSF1A

[. . . ] FFSF1A Thank you for choosing the Sanus Systems FFSF1A flat panel foundation mount. [. . . ] Sanus Systems is not liable for injury or damage caused by incorrect installation or use. Hardware and procedures for multiple mounting configurations are included. When you see this symbol, choose the correct configuration to suit your needs. Not all hardware included will be used. 001480. eps FPS10 - Full Assembly OPT Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA · (6901-100130 <03>) USA Customer Service 1-800-359-5520 · www. sanus. com Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts! [03] x 1 [02] x 1 001483. eps 001482. eps FPS10 - Star [08] x 1 [04] x 1 [05] x 2 [06] x 1 [07] x 1 [09] x 1 001486. eps 001484. eps FPS10 - Clamps FPS10 - Brackets [12] x 1 [10] x 2 [11] x 1 M6 1/4-20 M4 M5 M6 [15] x 4 M6 x 35mm M6 x 20mm [16] x 4 [17] x 4 [18] x 4 [01] x 1 001481. eps FPS10 - Pillar [13] x 6 [14] x 2 001485. eps 001485. eps FPS10x 12mm shelf M4 FPS10 - Base and shelf Base and M5 x 12mm [21] x 4 [22] x 4 001484. ep FPS10 - Bra M6 x 12mm 1/4-20 x 0. 75 in. [23] x 4 [24] x 1 M4 / M5 M6 / M8 M4 x 30mm M5 x 30mm M6 x 35mm [19] x 4 [20] x 4 [25] x 4 [26] x 4 [27] x 4 1/4-20 x 0. 625 in. M4 / M5 M6 / M8 5/32 in. [28] x 4 [29] x 4 [30] x 2 [31] x 2 [32] x 1 6901-100130 <03> 1: Install Pillar on Base [01] [11] [13] 2: Install Brackets on Pillar 001487. eps FPS10 - Install Pillar to Base 001487. eps FPS10 - Install Pillar to Base [05] [15] [07] [06] [13] [04] [14] [15] [05] 001488. eps FPS10 - Install Brackets 6901-100130 <03> 3: Choose Correct Mounting Plate 75mm x 75mm or 100mm x 100mm [03] [03] 75mm 100mm 75mm 100mm [32] [03] [02] 001489. eps 200mm 200mm 6901-100130 <03> 001490. eps ps 0. e 42 01 ows 0 rr A 00 A 14 rro 20. e ws ps 001482. eps 200mm x 200mm- Star FPS10 NOTE For monitors with 200mm x 200mm hole spacing, you must remove the existing plate from the head assembly [03] and replace it with plate [02]. 00 FP 4: Install Head Assembly on Monitor For Monitors with Flat Back [21], [22], [23] [16], [17], [18] [19], [20] [03] For Monitors with a Curved Back or an Obstruction [28], [29] [03] [19], [20] [16], [17], [18] [25], [26], [27] 6901-100130 <03> 001516. e 5: Install Monitor on Pillar [01] 001504. eps [03] [24] 6: Install Shelf [32] [08] [30] [31] [09] 001504. eps 6901-100130 <03> 7: Install Wire Channel Covers [12] [10] [10] 001506. eps CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. [. . . ] CSAV assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. 6901-100130 <03> [. . . ]