User manual SANUS EURO FOUNDATIONS SATELLITE SPEAKER STAND SPECIALTY BRACKET-EFSATW EFSATS

[. . . ] Specialty Bracket Mounting Instructions Sanus Systems makes every effort to provide a universal speaker stand. [. . . ] Finally line the two bottom holes on this angled surface up with the slots on the Klipsch RS bracket and reinsert two of the screws that were previously used to hold the foot in place. Klipsch Quintet First attach the Klipsch Quintet (EFKQ) brackets to the top of your speaker stand pillars using the flat head screws (g). Next line up the hole on the angled surface of the quintet speaker with the slot in the mounting bracket. Finally use the Phillips pan head screws (l) to attach the speaker to the bracket. Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11. 19. 04 Customer Service: 800. 359. 5520. See complementary Sanus products at www. sanus. com Rear Bolt L bracket First attach the L brackets to the top of your speaker stand pillars using the flat head screws (g). Next place the correct speaker bolt through the L bracket, through the spacer, and thread it into the insert on the back of the speaker. Infinity Modulus and Other Bottom Bottom Bolt Mounting Speakers First thread the Modulus nuts down onto the Modulus studs and thread these combinations down into the top of your speaker stand pillars. [. . . ] Once this bracket is attached it will slide down over the back of the L bracket. Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11. 19. 04 Customer Service: 800. 359. 5520. [. . . ]