User manual SANUS ELM205 POWER CONDITIONER

[. . . ] ELM205 Power Conditioner (6901-100215 <00>) LISTED Specifications · · · · · · · · · · 2, 700 joule surge suppression Dual Stage EMI/RFI noise filtration 20-50dB (100KHz-1MHz) Gold-plated coaxial input and outputs Combo ethernet/phone jack - supports up to 100Base-T connection speeds 15A/125V/60Hz 330V UL clamping voltage Audible alarm if surge has served it's useful life Resettable fuse Interchangeable 1' or 6' power cords ClickFit compatible Warranty Your Sanus ELM205 has a five year product warranty against manufacturer's defects. [. . . ] Not all hardware included will be used. Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA Customer Service: 1-800-359-5520 · info@sanus. com · www. sanus. com ©2009 Milestone AV Technologies. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. Specification Views The Power, Surge, and Ground LED lights illuminate to indicate that the surge protector is working. If the lights fail to illuminate, see Troubleshooting your Power Conditioner on the next page. Power Surge Ground In Out In Out From wall, DSS, cable, or other coaxial output To TV, VCR, or other coaxial input To phone/modem or ethernet input From wall outlet or router Interchangeable Power Cord Resettable Fuse Transformer Spaced Outlet ClickFit Compatible 2 6901-100215 <00> Troubleshooting your Power Conditioner The Power, Surge, and Ground LED lights illuminate under normal operating conditions. If any of the lights fail to illuminate, follow the instructions below. If any of the lights still fail to illuminate, you need to replace your Power Conditioner. Power · If the Power light is off, verify that your power conditioner is plugged into a working outlet. · If the Power light is still off, unplug all accessories from the surge protected outlets and press the resetable fuse button. · If the Power light remains off, the power conditioner has served it's useful life and needs to be replaced. Surge · If the Surge light is off but the Power and Ground lights are on, or if the alarm sounds, the power conditioner has served it's useful life and needs to be replaced. Ground · If the Ground light is off but the Power and Surge lights are on, verify that you are using a properly grounded outlet. · If the Ground light is still off, the power conditioner has served it's useful life and needs to be replaced. OPT Changing your Power Cord [02] [05] 6901-100215 <00> 3 OPT Installing ClickFit NOTE You should use the ClickFit brackets that are included with select Sanus mounts, and the hardware, [03] and [04], that is included with the ELM205. [03] [04] OPT Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. [. . . ] Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. 4 6901-100215 <00> [. . . ]