User manual SANUS CFR535

[. . . ] All other brand names or marks are used for identification purposes and are trademarks of their respective owners. The CFR518, CFR524, and CFR535 are designed to support audio/video equipment. [. . . ] If any parts are missing or damaged, do not return the damaged item to your dealer; contact Sanus Systems Customer Service. English Install feet [02] (recommended) and adjust them as neccessary to level the rack ­ OR ­ install castors [03]. CAUTION: To avoid potential injury or property damage, always ensure that your rack is level. You can route your cables through the knockouts or through the opening (O) in the bottom panel. CAUTION: All knockouts that are used for wires without conduit must have bushings inserted in the knockout to eliminate damage to the cable's insulation. CAUTION: To avoid damage to your components due to overheating, ensure that there is adequate space between each unit for proper airflow. It is important to maintain an operating temperature inside of the rack that does not exceed 104°F (40°C). English Adjust the rails within one slot ­ OR ­ adjust the rails into any of the slots provided. NOTE: Be sure to adjust the top, bottom, right, and left rails evenly. English Verify that your grounding wire (W) is installed to the bottom rail hole (H) and the base ground stud (S) on the rack. [. . . ] milestone makes no representation of warranty , expressed or implied , regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. [. . . ]