User manual SANUS CFR127

[. . . ] All other brand names or marks are used for identification purposes and are trademarks of their respective owners. Do not shake, tilt, rock, sit, stand, or climb on your Component Series Rack. [. . . ] If any parts are missing or damaged, do not return the damaged item to your dealer; contact Sanus Systems Customer Service. Insert key into door lock and turn clockwise; pull door handle out and turn counter clockwise. This product contains small items that could be a choking hazard if swallowed. hardware and procedures for multiple mounting configurations are included. When you see this symbol, choose the correct configuration to suit your needs. To avoid potential injury or property damage, always ensure that your rack is level. If the grounding strap has not been installed, install the strap now by attaching one end of the ground wire to the door ground stud, and the other end of the ground wire to one of the bolts on the bottom of the rail. Om jordningsarmbandet inte har monterats, gör det nu genom att ansluta ena änden av jordledningen till dörrens jordningsbult och den andra änden till en av bultarna i skenans undersida. To avoid damage to your components due to overheating, ensure that there is adequate space between each unit , for proper airflow. NOTE: For clarity, the front door, top, and side panels are not shown. NOTE: Align the bottom of the shelf or blanking panel [B] with the lines [L] on OBS: Rikta in undersidan av hyllan eller utfyllnadspanelen [B] efter linjerna [L] the rack rail. To avoid damage to the grounding wire, remove the grounding wire before removing the front door. [. . . ] milestone makes no representation of warranty , expressed or implied , regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. [. . . ]