User manual SANUS ACCURATE FURNITURE 3 SHELF AV STAND-AFV48B

[. . . ] Step 5: Add 7" Pillars Thread a 7" Pillar (g) onto each exposed Shelf Connector (a). Place a Grommet (d) in each wire management hole in the Bottom and Middle Shelf (k). [. . . ] Do not use this product for any purpose that is not explicitly specified by Sanus Systems. Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call Sanus Systems before returning products to the point of purchase. Required Tools: k (10) Shelf Connector - a (6) Top Bolt - b (6) Foot - c Supplied Parts and Hardware: Some parts not shown as actual size* k Step 6: Add Top Shelf To add the Top Shelf (j), insert the front two Top Bolts (b) through the holes in the front of the Top Shelf, the Front Brace (l) and thread them into the 7" Pillars (g). Insert the back two Top Bolts through the holes in the back of the Top Shelf, the Spacers (e), and thread them into the 7" Pillars. Detailed View A Diagram 6 j b b j (4) 7" Pillar - g* (6) 3" Pillar - h* (6) 9" Pillar - i* Detailed View B (4) Grommet - d (2) Spacer - e (1) Allen Key - f l g front e (1) Top Shelf - j* (2) Bottom & Middle Shelf - k* g (1) Front Brace - l* Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 5. 27. 05 Customer Service: 800. 359. 5520. See complementary Sanus products at www. sanus. com Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 5. 27. 05 Customer Service: 800. 359. 5520. See complementary Sanus products at www. sanus. com Step 1: Foot Assembly Thread a Foot (c) into each 3" Pillar (h) until tight. Thread a Shelf Connector (a) into the other end of the 3" Pillar until tight. Diagram 1 Step 3: Add 9" Pillars Thread a 9" Pillar (i) onto each exposed Shelf Connector (a) until tight. [. . . ] Place a Top Bolt (b) through the Middle Shelf and thread it into each middle pillar. Diagram 4 k b k a [. . . ]