User manual SANUS SYSTEMS VLF311

[. . . ] Work by unqualified persons could be dangerous and may void the warranty. Before installation or service, disconnect the power supply to the work area by removing the fuse, "tripping" the circuit breaker, or unplugging the unit. Do not connect the appliance to the electricity supply by an extension cord. Extension cords do not guarantee the required safety of the appliance, e. g danger of overheating. Use The temperature in the drawer can reach up to approx. [. . . ] Do not use the plate warmer to re-heat, cook or keep food or drinks warm. The condensation from food or drinks could lead to moisture damage in the appliance. Forgotten items could melt or catch fire when the appliance is turned on. Flammable liquids and materials should never be stored in, above or under the plate warmer. Before cleaning the appliance, trip the circuit breaker and allow the appliance to cool. 4 Warning and Safety instructions General notes Children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance. Caution: Do not store items of interest to children in cabinets above or in the plate warmer. Children climbing on the appliance to reach these items could be seriously injured. Loose-fitting or hanging garments should never be worn while using the plate warmer. Moist or damp pot holders used on hot surfaces may result in steam burns. Due to the high temperatures radiated, objects left near the appliance could catch fire. Recommended temperatures for pre-heating: ­ approximately 104 °F (40 °C) b for cups and glasses. A hot drink placed in a cup warmed to this temperature will not cool as fast, while the cup itself can be touched easily. ­ approximately 140 °F (60 °C) r for serving dishes, bowls and plates Food will stay hot longer if placed on plates heated to this temperature while the plates will not be too hot to handle. Warming times Various factors will affect the warming times: ­ material and thickness of dishes, ­ quantity, ­ how dishes are arranged, ­ temperature setting. As you use the plate warmer you will learn which settings suit your needs best. However, the following information can be used as a guide: At temperature setting r of approximately 140 °F (60 °C) heating: ­ 6 place settings: 30 - 35 minutes. ­ 12 place settings: 40 - 45 minutes. 10 Cleaning and care Mat with non-slip surface Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the plate warmer. Do not return the mat until it is completely dry. Cleaning the exterior The exterior of the plate warmer can be cleaned with warm water and liquid dish soap applied with a soft sponge. Stainless steel Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner. To help prevent resoiling, a conditioner for stainless steel can also be used. Apply with even pressure. 11 Frequently asked questions Installation, maintenance and repairs to the electrical components of this appliance should only be by a qualified technician in accordance with national and local safety regulations. Repairs and other work by unqualified persons could be dangerous and may void the warranty. [. . . ] ­ whether the circuit breaker has tripped, the fuse has blown or the appliance is unplugged. the On / Off indicator does not light up when the appliance is turned on?Various factors can affect how long the dishes take to heat up, for example: ­ material and thickness of dishes, ­ quantity, ­ how the dishes are arranged, ­ temperature setting. As you use the plate warmer you will learn which setting suits your needs best. [. . . ]