User manual SANSUI STB-HD01

[. . . ] Your life, your style. STB-HD01 High Definition Digital Receiver Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated " dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions In the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT PLACE ANY OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES ON THE UNIT . CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH AC WALL MOUNTED SOCKET AND PRODUCT'S PLUG, FULLY INSERT. CAUTION: CHANGE OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. CAUTION: TO PREVENT PERMANENT DAMAGE OF FLAT PANEL DISPLAY (PDP TV, PDP MONITOR, etc. ), WHEN CHANNEL INFORMATION DISPLAY WITH "Radio Broadcast" OR "Loss of Signal" LONG TIME, PLEASE TURN OFF THE TV SET. Important Safeguard This sheet lists important safeguard that will help to assure your enjoyment and proper use of the HD-STB and accessory. [. . . ] If you select Dolby D (Dolby Digital ) and broadcaster send MPEG audio only, then your HD-STB will check up the Dolby Digital audio first and next select MPEG audio automatically. 4) Press ENTER or RIGHT to complete Audio Preference select. MENU AUDIO / VIDEO SETTING A/V TV Display Screen H Position Screen V Position Audio Preference Stereo Downmix MPEG Audio Adj. Sub Title 16:9 Center Center Dolby D Lt/Rt On Off Dolby D MEPG Press ENTER or to enter. Press to go back. to move. 19 UsingtheMENUSystem Audio Downmix For the stereo analog audio output, you can select Lt/Rt or Lo/Ro output mode. For the analog stereo connection, set the Lt/Rt for correct audio information. For the digital audio connection, set the Lo/Ro for full 5. 1 channel support. Also you can set up this function using DOWNMIX button on the remote control. 4) Press ENTER or RIGHT to complete audio downmix mode select. MENU AUDIO / VIDEO SETTING A/V TV Display Screen H Position Screen V Position Audio Preference Stereo Downmix MPEG Audio Adj. Sub Title 16:9 Center Center Dolby D Lt/Rt On Off Lo/Ro Lt/Rt Press ENTER or to enter. Press to go back. to move. MPEG Audio Adj. If broadcaster simultaneous broadcast MPEG Audio and Dolby Digital Audio, generally the MPEG Audio Level is louder than Dolby Digital Audio. On then the HD-STB will automatic decrease the MPEG Audio Level and make a similar Audio Level with Dolby Digital. Off then the HD-STB will follow by original Audio Level from broadcaster. For the analog audio connection, set to On for making similar audio level. For the digital audio connection, set to Off for making similar audio level. Sub Title In the Digital Broadcasting, the broadcaster broadcast Sub Title information with Audio and Video. Also you can set up this function using S TITLE button on the remote control. If Sub Title is On, the Sub Title information will display followed by picture. This HD-STB is not generated Sub Title, it is decode Sub Title information from Aerial signal. If Sub Title is On but do not display the Sub Title, check Aerial signal or consult your local broadcaster. 20 UsingtheMENUSystem 2. Time Setting From here you can adjust time, timer and time related setting. For using timer related function, you should setting up the clock. Clock Setting From here you can setup the current clock. If you set the Clock Setting to Off, the timer related function will disable and current time information will not display. If you setup to Auto, this HD-STB will receive clock information from Aerial signal. [. . . ] In the CH LIST, you can select available digital channel with CH p /q , PR t /u button. If you press FAV button on the remote control, the CH LIST to change to Fav1 CH LIST as favorite channel list which is set up in the Program Preference menu. Each time press FAV button, it will change All Æ Fav1 Æ Fav2 Æ Fav3 Æ All At the CH LIST display, if you can press QUICK CH button with CH selection bar, then you can assign that channel to QUICK CH. At any time, if you can press QUICK CH, then the HD-STB will quick change the channel you assigned QUICK CH. [. . . ]