User manual SAMSUNG UE40H5003

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG UE40H5003. We hope that this SAMSUNG UE40H5003 user guide will be useful to you.


SAMSUNG UE40H5003 : Download the complete user guide (2033 Ko)

You may also download the following manuals related to this product:

   SAMSUNG UE40H5003 (1930 ko)

Manual abstract: user guide SAMSUNG UE40H5003

Detailed instructions for use are in the User's Guide.

[. . . ] ❑❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. NN When you press the INFO button, a channel information banner will appear on the top of the screen. And then press the ENTERE button, you can see the details of the programme. ●● Scroll ◄, ► to view information for a desired programme while watching the current channel. ●● Scroll ▲, ▼ to view information for other channels. ▶ English ❑❑ Memorizing channels ■■ Aerial OO MENUm → Broadcasting → Aerial → ENTERE Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV. ◀ ▶ English ■■ Auto Tuning (depending on the country) OO MENUm → Broadcasting → Auto Tuning → ENTERE NN Automatically allocated programme numbers may not correspond to actual ●● Auto Tuning Aerial (Air/Cable): Select the aerial source to memorise. [. . . ] 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equaliser to its default settings. NN If Speaker Select is set to External Speaker, Sound Effect is disabled. ◀ ▶ English ■■ 3D Audio for PDP 4900 OO MENUm → Sound → 3D Audio → ENTERE 3D audio technology provides the immersive sound corresponding to the pop-up effect of 3D video by audio depth control in perspective. NN Available in only when watching 3D image. ◀ ▶ English ■■ Speaker Settings OO MENUm → Sound → Speaker Settings → ENTERE ●● Speaker Select t A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. MUTE buttons will not operate and the sound settings will be limited. NN When Speaker Select is set to External Speaker, the volume and ◀ ▶ English NN When Speaker Select is set to External Speaker. ●● TV Speaker: Off, External Speaker: On NN When Speaker Select is set to TV Speaker. ●● TV Speaker: On, External Speaker: On NN If there is no video signal, both speakers will be mute. ◀ ▶ English ●● Auto Volume To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. NN To use the volume control on the source device connected to the TV, set Auto Volume to Off on the TV. Otherwise, a change to the volume control of the source device may not be applied. ◀ ▶ English ■■ Additional Settings OO MENUm → Sound → Additional Settings → ENTERE ●● DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. NN According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. NN To increase or decrease the volume, adjust between the range 0 and -10 respectively. ◀ ▶ English ●● Digital Audio Out: Digital Audio out is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. The available Digital Audio output format may differ depending on the input source. NN By connecting to 5. 1ch speakers in a Dolby Digital setup, maximize your ◀ interactive 3D sound experience. Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). ▶ English ●● Dolby Digital Comp: This function minimizes signal disparity between a dolby digital signal and a voice signal (i. e. NN Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. ◀ ■■ Reset Sound OO MENUm → Sound → Reset Sound → ENTERE Reset all sound settings to the factory defaults. ▶ English ❑❑ Selecting the Sound Mode t When you set to Dual I-II, the current sound mode is displayed on the screen. Audio Type Mono A2 Stereo Stereo Dual Mono Dual I-II Mono Stereo ↔ Mono Dual I ↔ Dual II Mono Mono ↔ Stereo Mono → Dual I  Dual II  Default Automatic change Dual I Automatic change Dual I ◀ NICAM Stereo Stereo Dual ▶ NN If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. NN Only activated in stereo sound signal. NN Only available when the Source is set to TV. English ❑❑ Executing initial setup ■■ Setup OO MENUm → System → Setup → ENTERE Configure the channels and the time when setting up the TV for the first time or when resetting the unit. NN Execute the initial setup following instructions that the TV guides. ◀ ▶ English ❑❑ Setting the Time ■■ Time OO MENUm → System → Time → ENTERE The current time will appear every time you press the INFO button. ●● Clock: Setting the clock is for using various timer features of the TV. NN If you disconnect the power cord, you have to set the clock again. channel. –– Auto: Set the current time automatically using the time from a digital ▶ English NN The aerial must be connected in order to set the time automatically. –– Manual: Set the current time manually. NN Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. ◀ ▶ English Clock Set: Set the Date and Time. NN Available only when Clock Mode is set to Manual. NN You can set the Date and Time directly by pressing the number buttons on the remote control. Time Zone (depending on the country): Select your time zone. NN This function is only available when the Clock Mode is set to Auto. ◀ ▶ English Time Offset (depending on the country): Adjusts the time when your TV receives the time information via Internet. [. . . ] ●● Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. ●● The ideal viewing distance should be three times or more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen. ●● If you can not play 3D videos in some of the BD players, take out the disk from player and put it again, or restart the BD player. ◀ ▶ English ■■ 3D OO MENUm → Picture → 3D → ENTERE This exciting new feature enables you to view 3D content. NN "Full HD 3D Glasses™" Logo indicates compatibility between display products and 3D Glasses which are compliant with the "Full HD 3D Glasses™" format, and does not indicate picture quality of display products. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG UE40H5003




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG UE40H5003 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.