User manual SAMSUNG DP515A2GI

[. . . ] Using the computer 49 57 60 63 64 65 66 68 71 73 Using a wireless keyboard/mouse (Optional) Using hand gestures (Optional) Multi Card Slot (Optional) Connecting an External Display Device (Optional) Switching the picture mode Using the product as a monitor (Optional) Adjusting the Volume Wired Network Wireless Network (Optional) Using the TV (Optional) Chapter 6. Appendix 119 121 123 135 136 137 139 Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Samsung Packaging Take-Back Program Product Specifications Glossary Chapter 1. Getting Started Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off 3 5 17 20 25 Before You Start Before reading the User Manual, first check the following information. •• Optional items, some devices and software referred to in the User Manual may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Manual may not be the same as your own environment. [. . . ] To use the TPM security device, you have to initialize the TPM chip in the BIOS Setup, initialize the TPM program, and then register the user. •• This function is only supported for models with TPM (security chip). •• For more information, refer to the online help for the program. •• The program version described in this manual is subject to change and the screenshots and terms used in this manual may differ from the actual product. Chapter 3. Using the computer 81 Setting Up the TPM To use the TPM function, you have to complete the following steps. 1 Initializing the TPM chip information saved on the TPM Initializes the authentication chip. 2 Installing the TPM program Installs the TPM program. 3 Registering the TPM program Registers the TPM program. If you complete the steps above, you can use the TPM function. Using the TPM Security Device (Optional) Initializing the TPM chip When you use the TPM function for the first time or you want to register the user again, you have to initialize the TPM chip. •• Initializing the TPM chip erases all authentication information saved on the TPM chip. •• To initialize the TPM chip again while the TPM function is in use, you have to decrypt any existing files and folders encrypted by the TPM function first. Otherwise, you will not be able to access the files and folders after reinitialization. TPM Device Chapter 3. Using the computer 82 If the BIOS screen appears, select the 2 Configuration item and press Enter. Security > TPM Enabled Disabled Enabled Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc. Restart the computer. 1 When the Samsung logo screen appears, press the F2 key repeatedly. Set Device 3 TPMthe TPM to Clear. item to Enabled and set the Change Status TPM Device TPM State Security Chip State Enabled Clear No Change Clear Enabled & Activate Deactivate & Disable Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc. Using the TPM Security Device (Optional) Chapter 3. When the system reboots, press the When the system reboots, press the 5 following the onscreen instructions. If the user authentication window 2 user password you entered whenappears, enter the basic registering the user and click OK. 3 The folder (file) opens. Using the TPM Security Device (Optional) When the virtual drive (PSD) does not appear You can only use the virtual drive (PSD) when you have selected the Personal Secure Drive (PSD) option during the program registration. If you have not selected the option during the registration, complete the following steps. Chapter 3. Using the computer 88 When the virtual drive (PSD) is not loaded To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below. Right-click over the Security icon 1 tray of the Taskbar and selectPlatform Secure in the system Personal Drive > Load from the pop-up menu. load window, enter the basic user password and click Open the File 3 drive in the leftExplorer tree pane. You will see the Personal Secure 1 2 On the Start screen, click the bottom-left icon , and then click Infineon Security Platform Solution > Security Platform Management > User Settings tab > Configure Security Platform Features. When the Initialization Wizard appears, select Personal Secure Drive (PSD) and enter the user password. Click Next several times to the 3 Initialization Wizard toaccording wizard. instructions of the finish the Note that when you have copied confidential data to the PSD, the original data files are not encrypted. Using the TPM Security Device (Optional) When you have to register again (to erase the authentication information on the TPM chip) To register a user again, you need to delete the existing authentication information saved on the TPM chip and then clear the TPM chip. Using the computer 89 Deleting the virtual drive If a virtual drive has been created, you have to delete the virtual drive before deleting the existing authentication information saved on the TPM chip. > and click Personal Secure Drive > 1 Delete the virtual drive. Enter the password that you 3 TPM program and click Next. entered when registering the 4 Select Delete selected PSD and click Next. [. . . ] A LAN enables all connected devices to interact with other devices on the network. The current LAN uses the Ethernet media access control method developed in the early 1980s. To connect to an Ethernet, a network card called a LAN card, Ethernet card or network interface card is required. To exchange data between computers, a protocol is required besides the hardware equipment. [. . . ]