User manual SAMSON D412

[. . . ] For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3mm in each pole shall be incorporated into the electrical installation of the rack or building. MULTIPLE-INPUT VOLTAGE: This equipment may require the use of a different line cord, attachment plug, or both, depending on the available power source at installation. Connect this equipment only to the power source indicated on the equipment rear panel. Unplug this apparatus during lightning storms or when not in use for long periods of time. [. . . ] Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus. The XP25i is a lightweight, compact, personal sound system ideal for use in a variety of mobile presentation, tour guide and school activity applications. The XP25i provides exceptionally clear sound; offering 25 watts of power to a 5-inch full-range loudspeaker. unique to the XP25i is an integrated iPod dock for playback of pre-recorded speech , alerts , or music. The XP25i also features an expanded mixer section with a microphone input, line input, line output, as well as independent volume controls for iPod, and microphone. the XP25i system includes a push-to-talk microphone with 3' cable , shoulder strap , battery charger and microphone stand adapter. In these pages, you'll find a detailed description of the features of the XP25i portable PA, as well as a guide to its control panel, instructions for setup and use, and full specifications. Please don't forget to fill it out and mail it in so that you can receive online technical support, and so that we can send you updated information about this and other Samson products in the future. With proper care, your XP25i will operate trouble-free for many years. We recommend you record your serial number in the space provided below for future reference. Serial number: ____________________________________________ Date of purchase: __________________________________________ Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before shipping your unit to Samson. Microphone Stand Adaptor Charge Indicator will flash RED - 5/8" female thread adaptor when the battery is low and the for mounting the XP25i onto a unit is power on. Carry Handle - Ergonomically designed Carry Handle allows for easy transport. If you ever need to replace the battery, open the compartment cover, and remove the battery protection plate. Gently slide the old battery from the compartment and disconnect the RED and BLACK battery leads. Slide the battery into the compartment, replace the protection plate and slide the compartment cover closed. Note: If you have any questions about replacing the battery contact Samson or your local distributor. Follow these simple steps for using an iPod with your XP25i portable PA system. Install your iPod into the XP25i by sliding the iPod onto the connector. Be sure the iPod is seated properly and that it has made a solid connection in the dock. With the iPod playing, rotate the iPod Level control clockwise until you reach the desired volume level. Align the iPod protective bracket with the grooves on either side of the compartment and slide into place. [. . . ] We, Samson Technologies Corporation, located at 45 Gilpin Ave, Hauppauge, NY 11788 USA declare under our own responsibility that the Products: Equipment: Portable PA System Model: XP25i are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation instructions contained in the product documentation: 2006/95/EC 2004/108/EC LVD Directive EMC Directive Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement. Sound and television broadcast receivers and associated equipment -- Immunity characteristics -- Limits and methods of measurement. electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase). Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public lowvoltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection. [. . . ]