User manual SAITEK ST110

[. . . ] Whether you're cruising the The ST110 was designed for IBM PC and compatible skies in a jetliner, or heading for systems, and will work with Windows ®95/98-based games, the finish line in as well as your other DOS and Windows favorites. As shown an exciting race, under Features and Controls, this joystick boasts 3 thumbremember that controlled fire buttons, conveniently located at the top of the it's important to grip, plus a fast-reacting and easily-accessible finger trigger. be aware of how you're sitting and how you're You'll also appreciate the smooth and fluid operation of the holding the joystick! [. . . ] To remove an existing device, highlight the controller by clicking on it, and then click on Remove. Click on OK, and you're now back at the main Game Controllers window. With the 3-axis, 4-button joystick highlighted, click on the Properties button to open the Game Controller Properties dialog box. Select Calibrate under the Settings tab, and follow the on-screen instructions. The joystick cursor should move in all directions, and the button indicators should turn on when the buttons and trigger are pressed. When the throttle is pushed all the way forward and pulled back again, the third axis indicator in the center should go up and down. After you've finished testing, quit by clicking on OK in the Test window, and OK in the General window. Note that the actual controls for the buttons, trigger, and throttle are set within each individual game. Turn off your computer, and unplug the joystick from the computer's game port. Since these cables can sometimes cause problems, we suggest that your ST110 be connected directly to the game port. · Be sure to remove any existing controllers before you install the ST110, as noted in Section 2. Make sure that you have selected the 3-axis, 4-button joystick option. Even if you have already done this, recalibrating can sometimes solve problems. Remember that the throttle is used to calibrate the third axis, and should be pushed all the way forward and backward several times for proper calibration. · To avoid potential problems and conflicts, we recommend that you remove any existing controllers before installing the ST110. I calibrated the ST110 and loaded my game, but the game instructions say I have to calibrate it again. [. . . ] In order to deal with your problems as quickly as possible, we ask that you please follow these guidelines when contacting us: · Have access to your computer when you call!If you are experiencing problems with one particular game, try to have that game loaded. · Provide us with other relevant information, such as your computer's make and model, details on your hardware and software, the version number of the game, etc. [. . . ]