User manual SAITEK PX5000

[. . . ] Important: The PX5000 uses advanced self calibration technology to ensure absolute precision game control. Do not press any of the gamepad buttons or move the analogue mini joysticks until 5 seconds after pressing the reset button on the Sony PlayStation®2. This may affect game play. GETTING CONNECTED: IT'S SO EASY! 1 Before you start, make certain that your Sony PlayStation®2/ PS oneTM/PlayStation® is turned OFF!2 Insert the Saitek PX5000 connector plug into one of your game console's controller ports. [. . . ] and TURBO, along with symbols for any buttons that are enabled with the turbo function. Press one of the buttons ([, }, ], {, L1, L2, R1, R2, D-Pad up/down/left/right) to set, edit, or delete the turbo function for that button. The display will show the button you pressed and its current turbo speed setting, as in *:SPEED 2. To change the speed for that button, move the right joystick to the right or left and select one of the settings: SPEED 0 (Turbo Off), SPEED 1, SPEED 2, or SPEED 3. Press MACRO to confirm your chosen speed setting and return to the SEL. KEY:?Note that if you press MACRO when SPEED 0 is displayed, the turbo function will be turned off for that button and its symbol will disappear from the display. To set the turbo function for another button, repeat Steps c and d, above. After programming all your desired turbo buttons, press SETUP to exit Turbo Mode. Macro Mode allows you to set up and name 2 individual Macro Groups, each containing up to 4 different Macro Keys. It's essentially a series of commands or actions that can be saved and stored, and then recalled during game play by pressing a single button!This button, which is used to trigger your programmed macro sequence, is called a Macro Key, and each assigned Macro Key can be used to trigger a sequence of up to 12 steps 3 PLAY IT SAFE!Whether you're fighting off the enemy, or in the middle of an exciting race, remember that it's important to be aware of how you are sitting and how you're holding the PX5000 gamepad!Try not to stay in the same position for too long, and be sure to take breaks now and then. Be smart--don't take a chance on straining your wrists, hands, or fingers!Plus, a word of caution: If you have strained muscles, broken bones, or joint problems in your fingers, hands, or arms, do not use the gamepad with any games that support the vibration feature. ENGLISH of your choice!When a Macro Group has been activated, the group's name and number will be displayed. You can call up any of that group's programmed sequences instantly during game play by holding down MACRO and pressing one of the designated Macro Keys. As you can imagine, this feature has the potential to add a tremendous amount of power to your game-playing abilities. After pressing SETUP to enter Setup Mode, the  menu option will automatically be displayed. If you're already in Setup Mode, move the right joystick down until  appears in the display. To select a different Macro Group, move the right joystick to the right to cycle through MACRO:1, MACRO:2, and MACRO:OFF. You now have a choice between activating or programming/editing a macro: Moving the right joystick up and down will alternate the display between ACTIVATE? [. . . ] If the alignment marks on the Axis Lock Dial are lined up with the marks on the stick (either horizontally or vertically), the axis is locked--and movement is restricted to that axis only. To unlock the axis, turn the dial until the alignment marks are in a diagonal position. If so, the analog sticks are currently emulating the D-Pad and the [, }, ], and { buttons. I'm trying to add a Macro Key, but the display keeps showing MACRO FULL. 6 · Only 4 Macro Keys can be active in a Macro Group at any one time. [. . . ]