User manual SAITEK HI-SPEED USB 2.0 HUB

[. . . ] 1 Firstly, plug your hub's power adapter into the power source, and then plug the power adapter cable into the power socket on your USB hub and press the hub's Power-save Button to turn it on. The On/Off light in the button will illuminate to show that the unit is receiving power. 0 Cable (the smaller mini-B type end) into the upstream port of your Hi-Speed USB 2. [. . . ] Com is designed to help you get the best performance from your Saitek product, and if you still have problems, we also have teams of product specialists around the world you can call for advice and support. Contact details are provided on the Technical Support Center list provided with this product. Saitek is dedicated to helping you enjoy your purchase ­ please call us if you have any difficulties or worries. To indicate that a USB device has been attached to your hub, the corresponding indicator light will illuminate and glow green to indicate a successful connection. To save power when you are not using your USB peripherals, simply press the Power-save button in the center of your hub and the light will go out - indicating that the hub has powered down. If you want to add more USB peripherals to your computer, you can add more USB hubs to the Saitek Hi-Speed USB 2. If you have access to an Internet connection, many of your technical queries may be answered with a simple visit to the Saitek Website at: www. The technical support area will provide you with all the information you need to get the most out of your product and solve any problems you might have. Federal laws, rules and/or obligations shall not be enforceable in that particular territory and Saitek will adhere to those laws, rules, and/or obligations. When returning the product for repair, please pack it very carefully, preferably using the original packaging materials. IMPORTANT: To save yourself unnecessary cost and inconvenience, please check carefully that you have read and followed the instructions in this manual. This warranty is in Lieu of all other expressed warranties, obligations or liabilities. aNY IMPLIED WARRANTIES , OBLIGATIONS , OR LIABILITIES , INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE , SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. [. . . ] Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]