User manual SAITEK CYBORG R.A.T 7

[. . . ] (If the CD does not run automatically, select Start from the Windows® Taskbar, then Run and type D:\Install. After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue. at the Device Driver Installation screen , click on Next and follow the on-screen instructions. When prompted, plug your controller's USB connector into your computer, then click on Configure and then Continue Anyway. [. . . ] After reading the Disclaimer, select the I accept the terms of the Disclaimer option and click Next to continue. at the Device Driver Installation screen , click on Next and follow the on-screen instructions. When prompted, plug your controller's USB connector into your computer, then click on Configure. When the Controller Properties screen appears, click Next to view the Test screen. Now try out all your controller's buttons and controls to show that it is working properly. Upon completion of the installation, you have the option to Run Profile Editor, which will give you a view of the 3-D programming environment. If you do not wish to see the Profile Editor at this point, just click on Finish to complete the installation. For a complete guide on how to program your Saitek controller, visit the Saitek website at www. Note: Please do not connect your controller until asked to by the installation procedure. 1 2 3 With your computer switched on, close down any programs that are currently running and insert the Saitek Smart Technology CD into your CD-ROM drive. (If the CD does not run automatically, select Start from the Windows® Taskbar, then Run and type D:\Setup. In the profile editor select the button you want to assign a keyboard command to. You do this by right-clicking on the button from the list on the right of the screen. You will then have a small window called the Keypress Editor with a flashing cursor in it. Simply press the key(s) on the keyboard you wish to assign to your controllers button and then click OK. Repeat this procedure for all the buttons you wish to program and then click File, Save at the top of the Profile Editor window. Name the profile as you wish (usually it is recommended to call it the name of the game that the profile is intended for) and then click Save. To enable the profile either click the Profile Now icon at the top of the Profile Editor (it looks like a black and yellow crosshair) or right-click on the controller icon in your taskbar and select the name of the profile from the pop-up list of options. You will notice that when a profile is loaded that the controller icon in your taskbar has a green square behind it, indicating that a profile is currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear Profile from the pop-up list of options. 10 For a complete guide on how to program your Saitek controller, visit the Saitek website at www. Q My computer is not recognizing the Cyborg 3D Rumble Force ­ what's wrong? [. . . ] If you have access to an Internet connection, many of your technical queries may be answered with a simple visit to the Saitek Website at: www. Com The technical support area will provide you with all the information you need to get the most out of your controller, solve any problems you might have and provide you with the latest game configurations. If you do not have access to the Internet, or if the website cannot answer your question, you will need to contact your local Saitek Technical Support Team. However, before contacting Technical Support, here are a few tips to help us to help you: · Make sure you have followed all the steps shown in this manual Check that the controller is correctly connected to your computer Confirm that your PC is functioning normally At Saitek, we aim to offer comprehensive and thorough technical support to all of our users. [. . . ]