User manual SAGEM TIGR 155R DATASHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAGEM TIGR 155R. We hope that this SAGEM TIGR 155R user guide will be useful to you.


SAGEM TIGR 155R DATASHEET: Download the complete user guide (652 Ko)

Manual abstract: user guide SAGEM TIGR 155RDATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] In addition, to its cellular capabilities it has improved GNSS features. In addition to its size, it has the following outstanding characteristics: · Automotive temperature range: -40° to +85° C C · Minimum low power consumption in the standby mode: 1. 4mA · High input voltage range: 3. 4 V to 4. 2 V · USB2. 0high speed · Digital audio (PCM) There are two variants of the HiLoNC-3GPS module, the European and the US version. - EU variant: 2G - Quad band: GSM850, GSM900, DCS1800 and PCS1900 3G ­ Dual band: Band I ­ 2100 MHz and Band VIII ­ 900 MHz - US variant: 2G ­ Quad band:GSM850, GSM900, DCS1800 and PCS1900 3G - Triple band: Band II ­ 1900 MHz, Band IV ­ 1700 MHz andBand V ­ 850 MHz In addition to the HiLoNC-3GPS module, a complete development kit can be provided for customers. 1. 2 STANDARDS This product, together with its evaluation board, has been approved and is in compliance with the directives and standards listed below: Directives 99/05/EC 2004/108/EC 2006/95/EC 2002/95/EC 95/94/EC FCC part 2 FCC part 15 FCC part 22 FCC part 24 A-Tick FCC Number IC Number « Directive of the European Parliament and of the council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity », in short referred to as R&TTE Directive 1999/5/EC Directive on electromagnetic compatibility « Directive on electrical equipment designed for use within certain voltage limits » (Low Voltage Directive) RoHS Directive Automotive EMC Directive Frequency allocations and radio treaty matters Radio frequency devices subpart B ­ Unintentional Radiators Public mobile services subpart H ­ Cellular Radiotelephone Service Personal Communications Services, PCS (Narrow band PCS 901-902, 930-931, 940941 MHz, Broadband PCS 1850-1990 MHz) TBD VW3HILONC3GPS 9140A-HILONC3GPS Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 -page 4/49 EU Directive 99/05/EC 2004/108/EC 2006/95/EC 2002/95/EC 95/94/EC « Directive of the European Parliament and of the council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity », in short referred to as R&TTE Directive 1999/5/EC Directive on electromagnetic compatibility « Directive on electrical equipment designed for use within certain voltage limits » (Low Voltage Directive) RoHS Directive Automotive EMC Directive GCF: GCF-CC V3. 41. 0 PTCRB: NAPRD03 V5. 6 (2011/2 currentlatest version) (2011/2 currentlatest version) PTCRB / GCF Conformance 2G RF/Protocol/SIM/A-GPS 3GPP TS51. 010-1: Mobile Station (MS) conformancespecification; 3GPP TS51. 010-1 Part 1: Conformancespecification (PS: 2G Acoustic is not required for Module) TS 34. 121-1 : Terminal conformance specification, Radio 3G RF : TS 34. 121-1 transmission and reception (FDD) 3GPP TS 34. 171 Terminal conformance specification; Assisted Global Positioning A-GPS RF : 3GPP TS 34. 171 System (A-GPS); Frequency Division Duplex (FDD) TS 34. 123-1: User Equipment (UE) conformance specification; Part 3G Protocol/ A-GPS Protocol : TS 34. 123-1 1: Protocol conformance specification Acoustic: 3GPP TS 26. 132 TS 26. 132 : Speech and video telephony terminal acoustic test (PS: Not required for Module) specification TS 31. 121 UICC-terminal interface; Universal Subscriber Identity USIM digital:3GPP TS 31. 121 Module (USIM) application test specification ETSI TS 102230. Korea (KCC) certification TBD 1. China SRRC and MII TENNA cannot accept Embedded Module Certification now. [. . . ] PCM interface features include the following: · PCM master mode · Full duplex operation · 16 bits PCM data word length · Fixed PCM clock rate at 2. 048 MHz Signal PCM_CLK PCM_SYNC PCM_IN PCM_OUT Pin N° 21 22 66 65 Description PCM clock signal PCM sync signal PCM data input PCM data output Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 16/49 3. 5 PWM One PWM pin is available on the module. It's a general purpose PWM which can be used for driving a vibrating device, keypad backlight or LED. The PWM pin can be controlled through AT commands, allowing several periods and duty cycles. Signal PWM Pin N° 70 Description Pulse Width Modulation 3. 6 DATA 3. 6. 1 Dataservices The module supports the following services: Data over CSD: · 2400, 4800, 7200, 9600 and 14400 bit/s · Transparent and non transparent mode · V. 32 or V. 110 Data over GPRS: · 3 PDP contexts at the same time · PBCCH · Class 12 · CS1 to CS4 Data over EDGE · Class 12 Data over 3G (HSPA+): · Standard - DL: up to 3. 6 Mbps - UL: up to 0. 384 Mbps · Option - DL: up to 14. 4Mbps - UL: up to 5. 76Mbps 3. 6. 2 UART: V24 The V24 interface is provided on external pins of the module with the following signals: · RX/TX · RTS/CTS · DSR · DTR · DCD · RI UART Speed AT commands and DATA: up to 3. 6 Mbit/s Software download: up to 1 Mbit/s Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 17/49 Signal UART_DSR UART_DCD UART_TX UART_RTS UART_RX UART_CTS UART_RI UART_DTR Pin N° 15 58 60 59 17 16 61 14 Description (defined in Module's direction) UART Data Set Ready UART Data Carrier Detect UART Transmit UART Request To Send UART Receive UART Clear To Send UART Ring Indicator UART Data Terminal Ready 3. 6. 3 UART CONNECTION 3. 6. 4 USB A USB link is available for the AT commands and the trace port. This interface is compliant with the USB High Speed (480Mbit/s) and USB Full speed (12Mbit/s) specifications. If the USB feature is not used in the customers design, it is, however, strongly recommended to leave this interface accessible through test points for debug purposes. Signal USB_DP USB_DN VUSB Pin N° 68 67 69 Description USB Data Positive USB Data Negative USB Voltage 3. 7 SPARE I/O There are 6 GPIO that can be customized easily from the customer's application through appropriate AT commands and they can be configured as input or output: Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 18/49 Signal GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 Pin N° 39 40 41 83 84 85 Description General Purpose Input/Output 1 Default for GPS LNA enable purpose General Purpose Input/Output 2 Default for SIM detection purpose General Purpose Input/Output 3 Default for e-call trigger General Purpose Input/Output 4 General Purpose Input/Output 5 General Purpose Input/Output 6 3. 8 PWON One power input pin is available to start up the module. Signal Pin N° Description PWON 32 Low level active input signal to power up the module Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 19/49 3. 9 RESET Pin N° 27 Description Low level active input signal to reset the module One reset input pin is available to reset the module in case of undesirable behavior. Signal RESET 3. 10 Signal ADC ADC Pin N° 30 Description Analog to digital converter input One ADC input pin is available to measure an external analog voltage through dedicated AT commands. 3. 11 VBACKUP One VBackup pin is available toback-up register contents of some internal PMIC registers. It is used to connect a backup battery coin cell or rechargeable backup battery or super cap. This pin isinput / outputand can manage the charge function of the backup battery. Default for SIM detection purpose General purpose input/output 3 JTAG reset +3. 7 V power supply (nominal) +3. 7 V power supply (nominal) GND GND GND GND GND GND GND GND GND GND GND GND Reserved for use. UART data carrier detect UART request to send UART transmit UART ring indicator Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 25/49 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 SDIO_CLK SDIO_DATA3 SDIO_DATA1 PCM_OUT PCM_IN USB_DN USB_DP USB_VBUS PWM VGPIO SPI_IN SPI_OUT SPI_SEL SPI_CLK TMS TDI TDO SIM_RST RFU RFU TCK GPIO4 GPIO5 GPIO6 RFU 2G_RF_IND RTCK GND GND GND GND GND GND Digital bi-directional buffer Digital bi-directional buffer Digital bi-directional buffer Digital output buffer Digital input buffer Digital bi-directional buffer Digital bi-directional buffer Digital output buffer Digital outputbuffer Power supply output Digital input buffer Digital output buffer Digital bi-directional buffer Digital bi-directional buffer Digital input buffer Digital input buffer Digital output buffer Digital output buffer RFU RFU Digital input buffer Digital bi-directional buffer Digital bi-directional buffer Digital bi-directional buffer RFU Digital bi-directional buffer Digital output buffer GND GND GND GND GND GND Secure digital interface Secure digital interface Secure digital interface Digital audio out Digital audio in USB data USB data USB voltage PWM output +2. 85V power supply output Serial peripheral interface Serial peripheral interface Serial peripheral interface Serial peripheral interface JTAG mode select input JTAG data input JTAG data output SIM reset Reserved for use. JTAG clock input General purpose input/output 4 General purpose input/output 5 General purpose input/output 6 Reserved for use. JTAG return clock GND GND GND GND GND GND Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 26/49 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND The signals which are unused must be left unconnected. If flow control is not used on the UART, the RTS signal must be connected to the CTS signal and the DTR signal must be connected to the DSR signal. For details please refer to the TIGR 155R module Application Notes document. Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 27/49 4. 2 POWER DOMAINS AND UNUSED PINS POLICY Signal Name RFU RFU RFU RF GND GND GND GND AUX GND GPS GND RFU UART_DTR UART_DSR UART_CTS UART_RXD SDIO_CMD SDIO_DATA2 SDIO_DATA0 PCM_CLK PCM_SYNC RFU RFU RFU RFU RESET VBACKUP VBAT ADC RFU PWON SIM_VCC SIM_DATA SIM_CLK RFU RFU RFU GPS_LNA_EN SIM_DET GPIO3 TRST VBAT Function Reserved Reserved Reserved Primary RF IN/OUT POWER POWER POWER POWER Diversity RF IN/OUT POWER GPS RF POWER Reserved UART UART UART UART SDIO SDIO SDIO D-AUDIO D-AUDIO Reserved Reserved Reserved Reserved RESET EXT_VDD POWER ADC Reserved POWER ON SIM SIM SIM Reserved Reserved Reserved GPIO GPIO GPIO JTAG POWER Power Domain Connection when not used / Mandatory connection Left Open Left Open Left Open 0V 0V 0V 0V 0V 0V 0V 0V HILONC3GPS Pins 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 0V 0V 1. 8V 1. 8V 1. 8V 1. 8V 2. 85V 2. 85V 2. 85V 1. 8V 1. 8V 0V 0V Left Open Loop to DSR Loop to DTR Loop to RTS RXD Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open VBAT Left Open Left Open POWER ON SIM_VCC SIM_DATA SIM_CLK Left Open Left Open Left Open Left Open Left Open Left Open Left Open VBAT 1. 8V 3V 3. 7V 2. 1V 1. 8V 1. 8 or 3V 1. 8 or 3V 1. 8 or 3V 1. 8V 1. 8V 1. 8V 1. 8V 3. 7V Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 28/49 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 VBAT GND GND GND GND GND GND GND GND GND GND GND GND RFU UART_DCD UART_RTS UART_TXD UART_RI SDIO_CLK SDIO_DATA3 SDIO_DATA1 PCM_OUT PCM_IN USB_DN USB_DP VUSB PWM VGPIO SPI_IN SPI_OUT SPI_SEL SPI_CLK TMS TDI TDO SIM_RST RFU RFU TCK GPIO4 GPIO5 GPIO6 RFU 2G_RF_IND RTCK GND GND GND POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER Reserved UART UART UART UART SDIO SDIO SDIO D-AUDIO D-AUDIO USB USB USB PWM EXT_VDD SPI SPI SPI SPI JTAG JTAG JTAG SIM Reserved Reserved JTAG GPIO GPIO GPIO Reserved GPIO JTAG POWER POWER POWER 3. 7V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 1. 8V 1. 8V 1. 8V 1. 8V 2. 85V 2. 85V 2. 85 V 1. 8V 1. 8V 3. 075V 3. 075V 5V 2. 85V 2. 85V 1. 8V 1. 8V 1. 8V 1. 8V 1. 8V 1. 8V 1. 8V 1. 8 or 3V VBAT 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V Left Open Left Open Loop to CTS TXD Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open SIM_RST Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open Left Open 0V 0V 0V 1. 8V 1. 8V 1. 8V 1. 8V 1. 8V 1. 8V V 0V 0V 0V Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 29/49 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V 0V Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 30/49 5. ELECTRICAL SPECIFICATIONS Five system operating states are defined: · NO SUPPLY: No power voltage is present. · OFF: Main power voltage is present, backup voltage may be present or not. · ACTIVE: Main power voltage is present, backup battery may be present or not. · SLEEP: Main power voltage is present, backup battery may be present or not. If not specified, all electrical values are given for the active state at VBAT=3. 7V and an operating temperature of 25° C. 5. 1 VBAT The module is supplied through the VBAT signal with the following characteristics: Parameter Name Min. VBAT period (ms) VBAT low duration (us) VBAT rise time (us) VBAT fall time (us) VBAT maximum voltage (V) VBAT minimum voltage (V) VBAT drop voltage (mV) Transient voltage (V) Noise level (Vrms)@100KHz-1MHz VbatTe (*) VbatTi (*) VbatTr (*) VbatTf (*) VbatMax (*) VbatMin (*) DeltaVbat (*) 4. 614 550 0 0 3. 4 3. 1 4. 615 DC VBAT period 4. 2 300 (**) 50mV * See Application Notes for more details. [. . . ] * The LNA used for the measurement is an Avago MGA-231-T6 with the following charactericitc: Gain = 17. 1 dB NF = 1. 06 dB Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 39/49 6. 1. 2 Typical transmission values at normal temperature range Typical transmission values is as below Frequency band GSM850 (dBm) EGSM (dBm) DCS (dBm) PCS (dBm) Frequency band UMTS B1(dBm) UMTS B8(dBm) Typ. 22. 5 22. 5 ETSI value 30. 5 ~ 35. 5 30. 5 ~ 35. 5 27. 5 ~ 32. 5 27. 5 ~ 32. 5 ETSI value 20. 3 ~ 25. 7 20. 3 ~ 25. 7 6. 2 EXTENDEDTEMPERATURERANGE 6. 2. 1 Typical Cellular and GPS sensitivity at extended temperature range Frequency band Temperature (° C) Typical sensitivity (dBm) Frequency band Temperature (° C) Typical sensitivity (dBm) Frequency band Temperature (° C) Typical sensitivity (dBm) Frequency band Temperature (° C) Typical sensitivity (dBm) Frequency band Temperature (° C) Typical sensitivity (dBm) Frequency band Temperature (° C) Typical sensitivity (dBm) -40 -109 -40 -109 UMTS B8 +85 -107 -40 -106 UMTS B1 +85 -106 -40 -106 PCS +85 -104 -40 -106 DCS +85 -104 -40 -106 EGSM +85 -105 < -102 ETSI value < -100 ETSI value < -100 ETSI value < -106 ETSI value < -103 GSM850 +85 -105 < -102 ETSI value ETSI value Note d'étude / Technical document : URD1­ OTL 5696. 3­ 001 / 72497 Edition 1. 08 HiLoNC-3GPS technical specifications 2011-10-20 - page 40/49 Frequency band Temperature (° C) Typical sensitivity (dBm) Frequency band Temperature (° C) Typical sensitivity (dBm) UMTS B2-option -40 -108 +85 -105 ETSI value < -106 ETSI value < -106 UMTS B5-option -40 -109 +85 -107 Frequency band Temperature (° C) GPS- Tracking sensitivity GPS - Cold-start sensitivity -40 -159 -143 GPS +85 -156 -140 6. 2. 2 Typical transmissioncharacteristics at extended temperature range Frequency band Temperature (° C) Output power - max. PCL (dBm) Frequency error (Hz) Phase error RMS (degree) Frequency band Temperature (° C) Output power - max. PCL (dBm) Frequency error (Hz) Phase error RMS (degree) Frequency band Temperature (° C) Output power - max. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAGEM TIGR 155R




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAGEM TIGR 155R will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.