User manual SAECO XSMALL

[. . . ] When using electrical appliances, basic safety precautions should always be followed, including the following: 1. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. Close supervision is necessary when the appliance is used by or near children. Allow to cool before putting on or taking off parts, and before cleaning the appliance. [. . . ] When warm-up is complete, the machine performs a rinse cycle of the internal circuits. When the operations described above are complete, check that the " " light is steady on. To brew coffee, dispense hot water or steam, and for a proper use of the machine, carefully follow the instructions provided. The machine that you have bought allows for certain adjustments that will permit you to use it to its full potential. Coffee is a natural product and its characteristics may change according to its origin, blend and roast. The Saeco coffee machine is equipped with a self-adjusting system that allows the use of all types of coffee beans available on the market (non caramelized). The machine automatically adjusts itself in order to optimise the extraction of the coffee, ensuring perfect compression of the tablet to obtain a creamy espresso coffee that will release all the aromas, regardless of the type of coffee used. The optimisation process is a learning process that requires the brewing of a certain number of coffees to allow the machine to adjust the compactness of the ground coffee. Attention should be given to special blends, which require grinder adjustments in order to optimise the extraction of the coffee (see section "Coffee Grinder Adjustment"). After priming the water circuit (with cold boiler) · During the Stand-by preparation phase (if a coffee product has been brewed) · During the turning off phase after pressing the ON/OFF button (if a coffee product has been brewed). The grinder adjustment knob, inside the coffee bean hopper, must be turned only when the grinder is working. Turn off the machine by pressing the ON/OFF button and remove the plug from the socket before carrying out any type of operation inside the coffee bean hopper. The machine lets you make slight adjustments to the coffee grinder to adapt it to the kind of coffee used. After the prebrewing cycle, coffee begins to come out of the dispensing spout. Coffee brewing stops automatically when the pre-programmed level is reached; however, it is possible to interrupt coffee brewing by pressing the button initially pressed. This feature may slightly lengthen the brewing time, allowing the intense flavour of the coffee to develop fully. Warning: At the beginning, short spurts of hot water may come out: Danger of scalding. The hot water wand may reach high temperatures: Never touch it with bare hands. Before dispensing hot water, check that the green temperature ready " " light is steady on. When the machine is ready, proceed as follows: · Fill the cup with hot water to the desired level; to stop hot water dispensing, turn selector switch counter-clockwise back to the " " position. Occasionally, after turning the selector switch, hot water may not be dispensed and the " " light may blink slowly. To obtain a flow of hot water, simply wait until the " " light stops blinking and remains constantly on. [. . . ] Repeat this operation until the descaling solution is finished and the water tank is empty. When the descaling solution is finished, rinse the water tank and fill it with fresh water. Empty the water tank by turning the selector switch clockwise to the " " position. When descaling is complete, insert the Pannarello (if supplied) onto the steam wand as described in the "Cleaning and Maintenance" section. [. . . ]