User manual SAECO TALEA TOUCH FULL

[. . . ] Intervallo 1 on 00:00 off 00:00 intervallo 3 on 00:00 off 00:00 Before using the machine, please read the attached operating instructions. Carefully read the safety rules When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1 Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. 3 To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid. 4 Close supervision is necessary when any appliance is used by or near children. [. . . ] If "save settings" is not pressed the machine returns to the main menu and the customized settings will not be saved. Once the dispensing is completed, of the saved settings, and the machine automatically returns to the main menu. Some of the machine's functions may be programmed to customize operations according to your own requirements. Product programming (see page 23) setting (see page 25): - current date and time; - stand-by timer; - Turn on/off times over a span of a day (energy saving). Previous page After having set each of the following menus, press - To return to the previous screen WITHOUT saving the new settings; to save; to return to the main menu WITHOUT saving the new settings. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. In this menu you can: This function activates/deactivates a tone every time the machine is ready. In this menu you can: This function activates/deactivates a tone every time a key is pressed. In this menu you can: Press "cup-warming surface" In this menu you can: Keep the cup-warming surface always on. Keep the cup-warming surface off when the machine is in stand-by mode To clean the internal circuits in order to guarantee that the beverages are only made with fresh water. Note: this rinse cycle is performed every time the machine is turned on after the warming phase. In this menu you can: The machine informs the user when the "Aqua Prima" water filter needs to be replaced. In this menu you can: This setting automatically adjusts the parameters which allow the user to perform a correct machine maintenance. With the "Water hardness" function you can adapt your machine to the hardness degree of the water you use. It is recommended not to overlap intervals for turning on the machine. In order to set an interval for turning on the machine, press the key for the interval that you wish to set. Adjust the hour for turning on by pressing + or ­ Adjust the minutes by pressing + or ­ After having set the turn on time, adjust the turn off time by pressing the key. Adjust the hour for turning off by pressing + or ­ Adjust the minutes by pressing + or ­ Press the key to return to the turn on times. For each day, choose the intervals for turning on Scroll the days of the week and, for each day, select the interval/s you wish to activate. To select the day of the week You can select various intervals for each day. In this menu you can: Display the products dispensed by the machine perform the descaling cycle (the machine indicates how many litres can be dispensed before descaling). Perform the cleaning cycle of the Brew Group temporarily lock the touch screen (e. [. . . ] The machine should be installed in an adequately lit, ventilated, hygienic location and the electric socket should be within easy reach. Install it at least 10 cm / 4" from the walls and cooking surfaces. ⷠDo not use in places where the temperature may drop to a level equal to and/or lower than 0°C / 32 degrees Fahrenheit. If the machine has been exposed to such conditions notify the customer service center, who will have to carry out a safety check. [. . . ]