User manual SAECO TALEA GIRO FULL

[. . . ] Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. [. . . ] THE HOT WATER/STEAM WAND MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. 1 2 steam steam 3 hot water Fill 1/3 of the cup with cold milk. Select steam (see steps 2 and 3 on page 15). Immerse the hot water / steam wand in the milk. 4 5 6 Turn the knob to the position. The machine may take a few seconds to warm up before steam is dispensed. Froth the milk by gently swirling the cup. When you have finished, turn the knob until it is in the rest position ( ). 7 steam steam 8 9 hot water 8:30 am 15/06/06 Press menu. to return to the main Place the cup beneath the dispensing head. Press the coffee icon once to brew coffee. After dispensing, clean the steam wand as described on page 30. To brew 2 cappuccinos: · froth two cups of milk by following steps 1 to 6; · brew two coffees by following steps 7 to 9 (then press the icon of the desired coffee twice). MILK ISLAND (OPTIONAL) This device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the Milk Island, read the manual and all precautions carefully for correct use. Important note: the quantity of milk in the carafe must never be below the "MIN" minimum level nor exceed the "MAX" maximum level. To guarantee best results when preparing cappuccino, we recommend using cold (0-8°C / 32-45°F), partially skimmed milk. Milk Island - 08 Type MKI002 Fill the milk carafe with the quantity of milk desired (between the MIN and MAX levels indicated). Check that the light on the base is green. Turn the knob to the 5 The machine will stop automatically after steaming continuously for 2 minutes. To dispense more steam turn the knob to the ( ) position and then back to the position. Wait for the milk to be frothed. When the desired milk froth has been reached, turn the knob until it is in the rest position ( ). 7 8 6 Remove the carafe using the handle. Gently swirl the carafe and pour the milk into the cup. Position the cup with frothed milk under the dispensing head. Press "time/date settings" from the main menu. set clock Set all the parameters concerning the current time. current time 08:00 Set the current time on the machine (displayed on the main screen). time format 24 hr Set the time format. The machine can also display the time in American format (am/pm). date settings Set all the parameters concerning the calendar. This is important to correctly program the timers for switching the machine on and off. current date 15/06/06 Set the current date on the machine. Note: the day of the week is automatically set according to the set date. date format dd/mm/yy Set the date display mode. The machine also allows displaying the date in the American (mm/dd/yy) and in the (yy/mm/dd) format. stand-by settings after 1 hour This function allows you to set how much time will elapse (after the last coffee is brewed) before the machine enters stand-by mode. After performing a self-test and a warming phase, the machine is once again ready for use. 25 This function allows the machine to be turned on and off (stand-by) at specific times. The machine performs this function only if it is switched on via the power button. machine on/off interval 1 on 00:00 off 00:00 interval 2 on 00:00 off 00:00 interval 3 on 00:00 off 00:00 To set the first switch-on interval To set the second switch-on interval To set the third switch-on interval Note: after having set the switch-on time, adjust the switch off time by pressing . To correctly set the energy-saving function, proceed as follows: - set the individual switch on/off intervals. Make sure the switch-on intervals do not overlap. week day settings Scroll through the days of the week and, for each day, select the interval/s you wish to activate. Interval active for the selected day 1. 3. 4. 4. week day settings interval 1 on 07:30 off 09:00 interval 2 on 11:00 off 13:00 Monday Interval NOT active for the selected day The selected day of the week is displayed. interval 3 on 17:00 off 19:00 You can select various intervals for each day. Select the day of the week Note: the stand-by times set in the previous page are always valid. They will be activated also during the active intervals selected in this function. [. . . ] If the machine has been exposed to such conditions notify the customer service center, who will have to carry out a safety check. The machine must not be used in an explosive or volatile atmosphere or where there is a high concentration of dust or oily substances suspended in the air. Do not install the machine on top of other appliances. 36 SAFETY RULES DANGERS · · · · · · · The appliance must not be used by children and persons who have not been informed of its operation. Never direct the jet of hot water and/or steam towards yourself or others. [. . . ]