User manual SAECO MILK ISLAND

[. . . ] After having emptied the containers, delicately turn the machine onto one side. Keeping the button pushed, connect Milk Island to the coffee machine by joining the relevant connectors. 8 Milk Island is automatically configured when the coffee machine is turned on. At this point, re-position the coffee machine in its correct position and put back all its containers. [. . . ] Warning: before using Milk Island, clean the jug and the other components. The glass of the jug can reach very high temperatures: danger of scalding!It is forbidden to use it with other liquids of any kind or of any chemical composition. Important note: the quantity of milk in the jug must never be below the "MIN" minimum level nor exceed the "MAX" maximum level. To guarantee a better result when preparing a cappuccino, use cold milk (0-8°C). After having made slight circular movements of the jug, pour the milk into the cup. Dispense coffee in the cup (see coffee machine operating instructions). Note: when the milk jug is not being used, place the sugar container on the base. This protects the connection tubes from getting dirty and from accidental knocking. Do not make any technical changes or use the machine for unlawful purposes since this would create serious hazards!Milk Island is powered by low voltage from the coffee machine to which it is connected by a special electrohydraulic connector. Never use Milk Island if the electro-hydraulic power connector is faulty. If damaged, the electro-hydraulic connector must be replaced by the manufacturer or its customer service department. The connector must not come into contact with liquids, wet parts or other substances that could alter the effectiveness of the electrical contacts or cause a short circuit. Children are not aware of the risks linked with electrical appliances. Never direct the jet of hot steam and/or hot water towards yourself or others. Place Milk Island and the coffee machine in a safe place, where nobody can overturn it or be injured. Do not keep the machine at a temperature below 0°C; freezing may damage the machine. [. . . ] Do not keep the machine at a temperature below 0°C; freezing may damage the machine. Do not place the machine on hot surfaces and close to open flames to prevent the housing from melting or being damaged. After having used Milk Island, thoroughly clean the milk jug with hot water and in the dishwasher. To ensure that Milk Island and the coffee machine work properly and efficiently, we recommend the following: Choose a level surface; Select a location that is sufficiently well-lit, clean and near an easily reachable socket; Allow for a minimum distance from the sides of the machine, as shown in the appropriate booklet. [. . . ]