User manual RYOBI WDP1850

[. . . ] Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. D) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. [. . . ] , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intened could result in a hazardous situation. 5) BATTERY TOOL USE AND CARE a) Ensure the switch is in the off position before inserting battery pack. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. D) When battery pack is not in use, keep it away from other metal abjects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. E) Under abusive conditions, liquid may be ejected from the battery; avoid contact. 6) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. To reduce risk of injury, charge only nickel-cadmium type rechargeable batteries. Other types of batteries may burst, causing personal injury and damage. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injuries to person. To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. Lock switch trigger on your drill by placing the direction of rotation selector in center position. Make sure the latches on battery pack snap in place and battery pack is secured in drill before beginning operation. Lock switch trigger on your drill by placing the direction of rotation selector in center position. Locate latches of battery pack and depress to release battery pack from your drill. VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector (Forward/Reverse Selector) in center position. the direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. the drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked. [. . . ] " Note: If you have difficulty changing from one gear range to the other, turn the chuck by hand until the gears engage. CAUTION To prevent gear damage, always allow chuck to come to a complete stop before changing the speed or the direction of rotation. As the name implies, you can hand tighten or release drill bits in the chuck jaws. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (release) the drill bit. [. . . ]