User manual RYOBI TR30U

[. . . ] Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control or the power tool in unexpected situations. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. [. . . ] Any power tool that can not be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source before making any adjustments, changing accessories or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Check for misalignment or bindling of moving parts, breakage of parts and any other condition that may affect the power tools operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Under abusive conditions, liquid may be ejected from the battery; avoid contact. Use of improper extension cord could result in a risk of fire and electric shock. 1-2 For driving small screws 3-4 For driving screws into soft material 5-7 For driving screws into soft and hard materials 8-9 For driving screws into hard wood 10 - 11 For driving large screws For full power applications You may use this product for the purposes listed below: With the screwdriver held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for forward motion. the direction is reversed when the selector is to the right of the switch trigger. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use. To stop the screwdriver, release the switch trigger and allow the collet to come to a complete stop. Driving screws with screwdriver bits Light-duty drilling When charging the screwdriver, a red charge light will illuminate on the handle of the screwdriver. This red charge light will go off when the screwdriver is fully charged. Insert charger plug into input jack making sure it is properly connect ed. Charger can be used with normal household voltage of 230 V, 50Hz, AC only. A quick change chuck mounted on the screwdriver is easy for inserting or remoring the bits. WARNING Always wear safety goggles or safety glasses with side shields during product operation or when blowing dust. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. [. . . ] WARNING Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. Only the parts shown on the parts list are intended to be repaired or replaced by the customer. The screwdriver spindle is locked when the On/Off switch is not pressed. [. . . ]