User manual RYOBI TDS4000

[. . . ] Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES: The use of accessories or attachments other than those recommended in this manual might present a hazard. Do not use separate reducing bushings or adapters to adapt large hole grinding wheels. [. . . ] Do not use separate reducing bushings or adapters to adapt large hole grinding wheels. Use other personal protective equipment such as gloves, apron and helmet when necessary. Never place the tool on the floor or other surfaces while it is running. Never touch the wheel or place it on the floor or other surfaces while it is rotating. Model Grinding wheel Frequency Voltage* Input Spindle thread No load speed Overall length Net weight TDS4000 230 mm (9") 50 Hz 110 / 230 V 2000 W M14 6000 min. Check that the speed marked on the grinding wheel is equal to or greater than the rated speed of the tool. Ensure that the dimensions of the grinding wheel are compatible with the tool and that the wheel fits the spindle. Grinding wheels must not be used for any operation other than grinding. To switch on the unit - use your index finger to press forward the safety lock (6) and then press the ON / OFF switch (5). After use, check the tool to make sure that it is in good condition. It is recommended that you take this tool to a Ryobi Authorized Service Center for a through cleaning and lubrication at least once a year. WARNING To ensure safety and reliability, all repairs should be performed by an authorized service center or other qualified service organization. Release the wheel guard lock lever (12) then turn the tool-less wheel guard (2) to the desired position. Turning axle is 90º on either side; otherwise the guard can't be locked. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. [. . . ] All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. [. . . ]