User manual RYOBI SINGER-GT2815-SERIALS502010885-AND-GREATER

[. . . ] When not in use, tools should be stored in a dry, high or locked up place, out of reach of childen. Do not force small tools or attachments to do the job of a heavy duty tool. Do not wear loose clothing or jewellery, they can be caught in moving parts. [. . . ] Rubber gloves and non-skid footwear are recommended when working outdoors. Never carry the tool by the cord or yank it to disconnect it from the socket. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. When tool is used outdoors, use only extension cords intended for outdoor use. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment breakage of parts, mounting and any other conditions that may affect its operation. Make sure that the tool is only connected to the voltage marked on the name plate. Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Stop the tool and adjust the tracking of the belt by rotating the tracking knob until the edge of the belt is even with the outer edges of both the front and rear rollers. Put the belt sander on the sanding frame and attach four slot into slot holder (25). By turning the adjustment bolt counterclockwise, the sanding frame will down and can be taken out. Turn the switch on and permit the rotation of the abrasive belt to reach full speed. Excessive pressure will retard the abrasive action, leave an uneven finish and cause extra wear to both the tool and the abrasive belt. Always lift the tool off the work piece before turning the switch off. It is recommended that you take this tool to a Ryobi Authorized Service Centre for a thorough cleaning and lubrication at least once a year. To ensure safety and reliability, all repair should be performed by an AUTHORIZED SERVICE CENTRE or other QUALIFIED SERVICE ORGANIZATION. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ] All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. [. . . ]