User manual RYOBI RYAN-285

[. . . ] ⷠUse the unit only in daylight or good artificial light. ⷠBe aware of the risk of injury ta the head, hands and feet. ⷠWhen working with the unit, always wear sturdy, rubber-soled footwear and body protection appropriate to operation of the unit. [. . . ] ⷠWhen working with the unit, always wear sturdy, rubber-soled footwear and body protection appropriate to operation of the unit. ⷠWhen working with the unit, use the safety attachments supplied. All interventions, whether for maintenance, repair or for changing cutting head or safety attachments, must be undertaken with the motor stopped. ⷠFrequently inspect the condition of the cutting head, All damaged parts must immediately be replaced. ⷠFollow all the required precautions when undertaking replacement. ⷠUse only replacement parts recommended by the manufacturer. ⷠAll guards must be installed properly before operating the unit. ⷠTurn off the unit and pull the main plug before set-up or cleaning of the unit, and before testing for tangled or damaged wires. Cut to your left for best cutting, and to throw the clippings away from the operator. Move the trimmer slowly in and out of the area being cut, using a forward-backward or side-to-side motion. The life of your cutting line depends on your trimming techniques, what is being cut, and where the cutting is being done. some line breakage will occur from: · Entanglement with foreign matter · INSTALLING A NEW TRIMMING LINE The trimming line may be replaced by two methods - rewinding the existing reel or installing a prewound reel. Loop the line into two equal lengths before inserting it into the holes. Insert the ends of the line through the eyelets in the outer spool (Fig. Grasp the ends and pull firmly to release the line from the slots in the spool. Hang the unit by the handle loop and store it in a dry, well-ventilated area, out of the reach of children. [. . . ] Grasp the ends and pull firmly to release the line from the slots in the spool. Hang the unit by the handle loop and store it in a dry, well-ventilated area, out of the reach of children. Vibration Level Sound pressure level LPAm = 74, 6 dB (A) (700 W) (no load) Measured sound power LWA = 94, 6 dB (A) (700 W) level (no load) Guaranteed sound power level LWA = 96 dB (A) (700 W) (no load) Cutting path diameter Operating weight Trimming line diameter 370 mm (700 W) 4, 9 Kg (700 W) 2, 0 mm (700 W) Motor stops / will not start 2. [. . . ]