User manual RYOBI RWS1400

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RYOBI RWS1400. We hope that this RYOBI RWS1400 user guide will be useful to you.


RYOBI RWS1400 : Download the complete user guide (13147 Ko)

Manual abstract: user guide RYOBI RWS1400

Detailed instructions for use are in the User's Guide.

[. . . ] The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation. Position your body to either side of the blade, but not in line with the blade. Kickback could cause the saw to jump backwards, but kickback forces can be controlled by the operator, if proper precautions are taken. When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the saw motionless in the material until the blade comes to a complete stop. [. . . ] Always observe that the lower guard is covering the KICKBACK CAUSES AND RELATED WARNINGS: ?kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator; when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator; if the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator. ? ? ? ? Kickback is the result of saw misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below. Maintain a firm grip with both hands on the saw ? 1 English blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released. Be sure to disconnect the tool from the power supply before attaching or removing the saw blade. Clean the tool and guarding system with clean cloths, or blow it clean with compressed air. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc. Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. For greater safety and reliability, all repairs should be performed by an Authorised Ryobi Service Centre. Do not place the laser in a position that may cause anyone to stare into the laser beam intentionally or unintentionally. Do not operate the laser around children or allow children to operate the laser. Any repairs must only be carried out by the laser manufacturer or authorized service agent. ? LUBRICATION All of the bearings in the product are lubricated with a suf?cient amount of high grade lubricant for the life span of the product under normal operating conditions. ? ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling. MAINTENANCE Wear ear protection WARNING The product should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product will prevent accidental starting that could cause serious injury. When servicing, use only identical Ryobi replacement Wear eye protection Laser radiation. [. . . ] This warranty in no way affects your legal rights concerning defective products. AUTHORISED SERVICE CENTRE To find an authorised service centre near you, visit ryobitools. I hndelse av felaktig funktion medan garantin r i kraft skall produkten sndas UTAN ATT DEMONTERAS tillsammans med inkpsbeviset till leverantren eller till nrmaste servicecenter som auktoriserats av Ryobi. EN WARNING IT AVVERTENZE The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI RWS1400




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI RWS1400 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.