User manual RYOBI RHT7065RL

[. . . ] Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool?s operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. [. . . ] It is presently unknown what, if any, vibrations or extent of exposure may contribute to the condition. There are measures that can be taken by the operator to possibly reduce the effects of vibration: Keep your body warm in cold weather. When operating the unit wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud?s Syndrome. After each period of operation, exercise to increase blood circulation. If you experience any of the symptoms of this condition, immediately discontinue use and see your physician about these symptoms. The vibration level during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used. Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time. SPECIFIC SAFETY RULES WARNING This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Do not remove cut material or hold material to be cut when blades are moving. A moment of inattention while operating power tools may result in serious personal injury. When transporting or storing the hedge trimmer, always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades. During operation the cable may be hidden in shrubs and can be accidentally cut by blades. Thoroughly inspect the area where the machine is to be used and remove all rocks, sticks, metal, wire, bones, toys, or other foreign objects. If a residual current device is required, use an RCD with a tripping current of 30mA or less. If the power cord or extension cable becomes damaged during use, disconnect the cord from the supply immediately. Never cut or trim anywhere you cannot clearly see the entire length of the blades. failure to do so can INTENDED USE This product is intended for cutting and trimming hedges , bushes and shrubs. It is intended for operation below shoulder level and for domestic use only. ENVIRONMENTAL PROTECTION Recycle raw materials and waste electrical products instead of disposing of as waste. [. . . ] This warranty does not cover transportation cost or consumable items such as fuses and batteries. This limited warranty is void if the product?s original identification (trade mark, serial number) markings have been defaced, altered or removed or if product is not purchased from an authorized reseller or if product is sold AS IS and / or WITH ALL FAULTS. Subject to all applicable local regulations, the provisions of this limited warranty are in lieu of any other written warranty, whether express or implied, written or oral, including any warranty of MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty is valid only in the European Union, Australia and New Zealand. [. . . ]