User manual RYOBI PCN-4545

[. . . ] Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. [. . . ] Check for misalignment or bindling of moving parts, breakage of parts and any other condition that may affect the power tools operation. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intened could result in a hazardous situation. 5) BATTERY TOOL USE AND CARE a) Ensure the switch is in the off position before inserting battery pack. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. D) When battery pack is not in use, keep it away from other metal abjects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. E) Under abusive conditions, liquid may be ejected from the battery; avoid contact. 6) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. Model Voltage Chuck (mm) Switch No load speed (drill mode): - Lo speed - Hi speed No load speed (impact mode): - Lo speed - Hi speed Max. Battery pack (KG) Battery pack: Charger PCN-4545 12 V 13 Variable speed 0 - 350 min-1 0 - 1250 min-1 30 1. (For CDI-1442 / 1802) We recommend that you use carbide-tipped bits and select impact mode when drilling in hard material such as brick, tile, concrete, etc. Lock switch trigger on your drill by placing the direction of rotation selector in center position. Make sure the latches on battery pack snap in place and battery pack is secured in drill before beginning operation. Lock switch trigger on your drill by placing the direction of rotation selector in center position. Locate latches of battery pack and depress to release battery pack from your drill. VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector (Forward/Reverse Selector) in center position. the direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. the drilling direction is reversed when the selector is to the right of the switch. [. . . ] Chuck body could slip in your hand or your hand could slip and come in contact with rotating drill bit. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. WARNING Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. WARNING Do not attempt to modify this tool or create accessories not recommended for use with this tool. [. . . ]