User manual RYOBI IDC520-2

[. . . ] Do not allow children, animals or other adults near your machine when in use - always keep them at least 6m (20ft) away from the cutting area. When the motor is running the safety distance, given by the handle, must always be maintained. Do not leave your machine unattended whilst it is connected to the electrical supply. Never allow children or people unfamiliar with these instructions to use the lawnmower. [. . . ] Never allow children or people unfamiliar with these instructions to use the lawnmower. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. This machine is fitted with a blade brake which stops the blade from rotating within 3 seconds once the switch box lever is released. Under no circumstances should you attempt to turn your machine aver on to its side whilst the motor is still running, or attempt to stop the bIade - always allow it to stop on its own. If the blade strikes an object, release the switch lever at once, disconnect your machine from the electrical supply and, when the blade is stationary, turn your machine on to ist side and examine the blade and nut for damage and have has specialized service station to repair the damage before restarting and operating the mower. Always disconnect your machine from the electrical supply before lifting or carrying. Stop the blade if the lawnmower has to be tilled far transportation when crossing surfaces other than grass, and when transporting the lawnmower to and tram the area to be mowed. Do not tilt the lawnmower when switching on the motor, except if the lawnmower has to be tilted far starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the Always disconnect your machine from the electrical supply before cleaning, inspecting or adjusting any part of it, or if the supply cable has become damaged or entangled. Always check that your lawn or cutting path is clear of ali sticks, stones, wire or other debris. Double insulation means greater electrical safety and obviates the necessity of having the machine earthed. Always keep the electrical supply cable away from the blades - be aware of its position at all times. The extension cable should always be secured firmly on the supporting hook (situated at the top of the handlebar) to prevent it from being damaged while the mower is in use. Never carry your machine by the cable or jerk the cable to separate the connectors. Check the condition of your cable before use and do not use if damaged. Your machine should always be switched off at the electrical supply, before disconnecting any plug and socket connector, or extension cables. Always supply the machine through a residual current circuit breaker (RCCB) with a cutout current not above 30 mA. Use an H05 RN-F or H05 VV-F or heavier power cable, with a minimum cross section of 2x1. The power mains connection plug must be covered in rubber and protected against sprays (IPX4). The use of the RCCB does not exempt the operator from taking all the safety precautions indicated in this manual. [. . . ] The power mains connection plug must be covered in rubber and protected against sprays (IPX4). The use of the RCCB does not exempt the operator from taking all the safety precautions indicated in this manual. Fix it inside clamping rims of cloth-bag by means of a simple rounded-off tool - a spoon handle. We suggest to clamp long sides A and B first and short sides C and D after (drawing 5). [. . . ]