User manual RYOBI ID-750-2RE

[. . . ] Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. [. . . ] Do not wear loose clothing or jewellery, they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. While operating, the work piece must be securely held with the vise or the clamp etc. In this case, sound insulation and hearing protection measures must be taken by the operator. This tool is started and stopped by squeezing and releasing the trigger switch (A). The speed can be adjusted in the high gear or in the low gear, by controlling the frigger-squeezing force. For continuous operation, press the lock button (E) while squeezing the frigger. ID-700RE Voltage Chuck capacity Drilling capacity in wood in steel in masonny Input No load speed high low Blows per minute high low Net weight Safety class II 230V ~ 50Hz 13 mm (1/2") 30 mm 13 mm 13 mm 700 W 0 - 3, 000 min-1 ID-750-2RE 230V ~ 50Hz 13 mm (1/2") 30 mm 13 mm 13 mm 750 W 0 - 3, 000 min-1 0 - 1, 000 min-1 0 - 48, 000 min-1 0 - 16, 000 min-1 2. To change the rotation direction, stop the tool and push the forward / reverse button (B). When the forward button is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. Then tighten the chuck securely by rotate the chuck head to left hand side. [. . . ] In the event of malfunction during the warranty period, please take the NONDISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. [. . . ]