User manual RYOBI EJS600QEO

[. . . ] We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with shields. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. [. . . ] Note: If the variable speed control selector is fully turned in the clockwise direction (zero setting) your saw may not run. Note: If you desire not to use the variable speed control selector, turn it in the full counterclockwise direction. This will allow the speed of your saw to be controlled by the amount of switch trigger depression. Running at low speeds under constant usage may cause your saw to become overheated. If this occurs, cool your saw by running it without a load and at full speed. The following guidelines may be used in determining correct speed for various applications: The blade storage area (11) is located on the back of dust port. They could come in contact with electrically live internal parts and cause electric shock, resulting in serious injury. WARNING Your saw should never be connected to power supply when you are assembling parts, making adjustments, installing or removing blades or when not in use. Disconnecting your saw will prevent accidental starting which could cause serious injury. WARNING Failure to unplug your saw could result in accidental starting causing possible serious injury. Check to make sure the back of the saw blade is properly positioned in the groove of the roller guide (12). WARNING To avoid possible serious injury, always wear safety goggles or safety glasses with side shields. Keep hands and fingers away, from the motor housing and blade clamp and do not reach underneath work while blade is cutting. WARNING To avoid serious personal injury, do not use saw without safety guard properly in place. LOW speed is ideal when minimum speed and power is required, for example starting cuts. mEDIUM speed is suitable for cutting hard metals , plastics and laminates. HIGH speed produces best results when maximum power is required, for example cutting wood. 5) Rest the front of the saw base on the workpiece and align cutting edge of the blade with the line on your workpiece. Make sure the power cord is out of the way of saw blade and not in the line of cut. Apply downward pressure to keep the saw steady and only enough forward pressure to keep the blade cutting. DO NOT FORCE YOUR SAW Forcing your saw may overheat the motor and break saw blades. This feature is adjustable and provides faster and more efficient cutting. [. . . ] Det elektriska verktygets stickkontakt skall vara anpassad till uttaget till vilket den ansluts. 7) Lutningsvinkeln kan ställas in mellan 0° och 45°, till vänster eller till höger. Nu lsai persoane care nu sunt familiarizate cu maina sau care nu au luat la cunotin aceste msuri de siguran s foloseasc maina. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]