User manual RYOBI EID750REN

[. . . ] Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. [. . . ] Do not wear loose clothing or jewellery, they can be caught in moving parts. Protective gloves and non-skid footwear are recommended when working outdoors. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. While operating, the work piece must be securely held with a vice or clamp to prevent it from moving due to the drill rotation. EID-500RE Voltage Chuck capacity Drilling capacity in wood in steel in masonry Input No load speed Blows per minute Weight 230 V ~ 50 Hz 13 mm (1/2") 25 mm 10 mm 13 mm 500 W 0 - 2, 700 min-1 0 - 43, 200 min-1 2. This tool is started and stopped by squeezing and releasing the trigger switch (A). The speed can be adjusted in either gear by controlling the force applied to the trigger. The maximum speed of the drill may be set at different speeds by adjusting the variable speed selector (D). For continuous operation, press the lock button (E) while squeezing the trigger. To change the direction of rotation, stop the tool and push the forward / reverse button (B). When the forward button is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. For easy changing of the drill bit this drill is equipped with an automatic spindle lock (M) which holds the spindle stationary when loosening and tightening the chuck. Insert the drill bit (I) into the chuck as far as the plain part of its shank will go. In this case, sound insulation and hearing protection measures must be taken by the operator. [. . . ] In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. [. . . ]