User manual RYOBI CDI1803M

[. . . ] Check for alignment of moving parts, free running of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service centre unless otherwise indicated in this instruction manual. [. . . ] To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. Model Voltage Chuck Switch No load speed (drill mode): - Lo speed - Hi speed - Super-Hi speed No load speed (impact mode): - Lo speed - Hi speed - Super-Hi speed Max. Battery pack Battery pack (not included): Charger (not included) CDI-1803M 18 V 13 mm Variable speed 0 - 370 min-1 0 - 750 min-1 0 - 2200 min-1 0 - 5920 min-1 0 - 12000 min-1 0 - 35200 min-1 55 Nm 3 kg BPP-1817M/BPP-1815M BC-1800/BC-1815-S Lock switch trigger on your drill by placing the direction of rotation selector in center position. Make sure the latches on battery pack snap in place and battery pack is secured in drill before beginning operation. Lock switch trigger on your drill by placing the direction of rotation selector in center position. Locate latches of battery pack and depress to release battery pack from your drill. Keyless chuck Switch trigger Direction of rotation selector (Forward/Reverse) Screwdriver bits Battery pack (not included) Depth gauge Rod Auxiliary handle Latches Depress latches to release battery pack To Tighten To Loosen 6 Lock the trigger switch by placing the rotation selector in the center position. When the selector is in center position, the switch trigger is locked. To stop, release switch trigger and allow the chuck to come to a complete stop. When the brake is functioning properly, sparks will be visible through the vent slots on the housing. The tool is equipped with an adjustable torque clutch for driving different types of screws into different materials. We recommend that you use carbide-tipped bits and select impact mode when drilling in hard material such as brick, tile, concrete, etc. [. . . ] Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]