User manual RYOBI 865R-SERIALS-401000001-THRU-

[. . . ] If the tool stops during use, release the trigger to reset and resume operation. WARNING Always remove battery pack from the product when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. Remember that a careless fraction of a second is sufficient to inflict serious injury. [. . . ] Make sure the raised rib on the battery pack aligns with the groove in the battery port. Press down on the battery pack to be sure contacts on the battery pack engage properly. Reattach the cap by placing it over the battery pack and twisting the arrow to the LOCK icon, making sure the cap is secure. To remove the battery pack, twist the cap to open and remove the battery pack from the battery port. Do not attempt to use this tool if the battery cap is not closed and locked. With the screwdriver held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for forward motion. the direction is reversed when the selector is to the right of the switch trigger. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use. CAUTION To prevent gear damage, always allow the collet to come to a complete stop before changing the direction of rotation. To stop the screwdriver, release the switch trigger and allowthe collet to come to a complete stop. Safety Alert V min-1 Volts Revolutions or reciprocations per minute Direct current CE Conformity Please read the instructions carefully before starting the machine. Recycle unwanted Waste electrical products should not be disposed of with household waste. Pour retirer le pack batterie, tournez le couvercle pour l'ouvrir puis sortez le pack batterie de son logement. Use a opção de velocidade HI (alta) para fazer furos e use a opção de velocidade LO (baixa) para aparafusar. În cazul în care efectua i opera ii în locuri în care colierul de strângere poate intra în contact cu cabluri ascunse sau cu propriul cablu de alimentare, ine i unealta electric de suprafe ele de prindere izolate. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. I händelse av felaktig funktion medan garantin är i kraft skall produkten sändas UTAN ATT DEMONTERAS tillsammans med inköpsbeviset till leverantören eller till närmaste servicecenter som auktoriserats av Ryobi. [. . . ] I händelse av felaktig funktion medan garantin är i kraft skall produkten sändas UTAN ATT DEMONTERAS tillsammans med inköpsbeviset till leverantören eller till närmaste servicecenter som auktoriserats av Ryobi. WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. [. . . ]