User manual RYOBI 750W RANDOM ORBITAL SANDER KIT ERO750VK

[. . . ] Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Do not attempt to operate this tool until you have read thoroughly and understood completely, safety rules, etc. Failure to comply can result in accidents involving fire, electric shock or serious personal injury. [. . . ] 22. THE APPLIANCE IS NOT INTENDED FOR USE BY YOUNG OR INFIRM PERSONS WITHOUT SUPERVISION. YOUNG CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Due to continued product refinement policy, product features and specifications can and will change without notice. Check current features and specifications with your retailer. Page 1 FEATURES 1 2 3 6 4 5 1. Hook and Loop Pad Page 2 APPLICATIONS You may use the random orbital sander for the purposes listed below: Sanding on wood surfaces. Sanding plastics. INSTALLING SANDPAPER Inspect sandpaper before installing. Unplug your sander. WARNING: Failure to unplug your sander could result in accidental starting causing possible serious personal injury. Holes in sandpaper must line up with holes in backing pad in order for the dust collection feature of your sander to function properly. Doing so will damage the cushion. FEATURES Your sander is suitable for sanding with coarse, medium, and fine grit sandpaper. It will produce a fine scratch free finish when used to sand with the grain on wood surfaces. Before attempting to use your sander, familiarize yourself with all operating features and safety requirements. SWITCH To turn the tool on, squeeze the trigger switch. The trigger is spring loaded and will return to the off position automatically. PREPARING FOR OPERATION CAUTION: Be careful not to let your hand completely cover air vents. LOCK ON BUTTON The sander is equipped with a lock on button which is designed for continuous sanding for extended periods. This button locks the trigger switch on so you can focus on your work. To release the lock or to turn off the sander, simply squeeze and release the trigger switch. SANDING (Fig. 1) WARNING: Unsecured work could be thrown towards the operator causing injury. For ease of operation, your sander has both loop handle and rear handle for two handed operation, which is necessary to maintain proper control. Hold your sander in front and away from you, keeping it clear of the work piece. [. . . ] Also follow the recommendations of the coatings manufacturers. Fig. 4 USING THE DUST BAG ASSEMBLY The dust bag assembly provides a dust collection system for the sander. Sanding dust is drawn up through the holes of the sanding disc and collected in the dust bag during sanding. Fig. [. . . ]