User manual RYOBI 750W IMPACT DRILL EID750RG

[. . . ] Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. [. . . ] Use of the power tool for operations different from intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. Recommended for the use of a residual current device with a rated residual current of 30 mA or less. SPECIFICATIONS Voltage Chuck capacity Drilling capacity in wood in steel in masonry Input No-load speed Blows per minute Weight 32 mm 13 mm 13 mm 750 W 0 - 2, 800 min-1 0 - 45, 000 min-1 2. 26 kg 240 V 50 Hz 13 mm (1/2") STANDARD ACCESSORIES Auxiliary handle and depth gauge. SPECIAL SAFETY RULES Wear ear protectors. Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance is not intended for use by young children or infirm persons. Adequate supervision by a responsible person must be provided to ensure that they do not play with the appliance. Visitors should wear safety glasses and be kept a safe distance from work area. 2 OPERATION APPLICATIONS (Use only for the purposes listed below. ) Drilling wood, materials and resin boards. Drilling metal: steel, brass, aluminum sheets, stainless steel & pipe. This tool can be started and stopped by squeezing and releasing the trigger switch. The speed can be adjusted by controlling the force applied to the trigger. The maximum speed of the drill may be set at different speeds by adjusting the variable speed selector. For continuous operation, press the lock-on button while squeezing the trigger. [. . . ] After adjusting the depth, fix the depth gauge again by turning the handle grip in direction. Recommendation: Always be supplied via a residual current device with a rated residual current of 30 mA or less. " and " LIVE TOOL INDICATOR This tool features a live tool indicator which illuminates as soon as the tool is connected to the supply. This warns the user that the tool is connected and will operate when the switch is pressed. MAINTENANCE After use, check the tool to make sure that it is in good condition. [. . . ]