User manual RYOBI 600W IMPACT DRILL EID600RG

[. . . ] A wrench or a key left attached to a rotating part of the power tool may result in personal injury. This enables better control of the power tool in unexpected situations. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. [. . . ] Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. Recommended for the use of a residual current device with a rated residual current of 30 mA or less. SPECIFICATIONS Voltage Chuck capacity Drilling capacity in wood in steel in masonry Input No-load speed Blows per minute Weight 25 mm 13 mm 13 mm 600 W 0 - 2, 700 min-1 0 - 43, 000 min-1 2. 04 kg 240 V 50 Hz 13 mm (1/2") STANDARD ACCESSORIES Auxiliary handle. SPECIAL SAFETY RULES Wear ear protectors. Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance is not intended for use by young children or infirm persons. Adequate supervision by a responsible person must be provided to ensure that they do not play with the appliance. Visitors should wear safety glasses and be kept a safe distance from work area. 2 OPERATION APPLICATIONS (Use only for the purposes listed below. ) Drilling wood, materials and resin boards. Drilling metal: steel, brass, aluminum sheets, stainless steel & pipe. This tool can be started and stopped by squeezing and releasing the trigger switch. The speed can be adjusted by controlling the force applied to the trigger. [. . . ] Loosen the handle grip by turning in direction, and tighten it at an easy to use position by turning the grip in direction. Recommendation: Always be supplied via a residual current device with a rated residual current of 30 mA or less. LIVE TOOL INDICATOR This tool features a live tool indicator which illuminates as soon as the tool is connected to the supply. This warns the user that the tool is connected and will operate when the switch is pressed. MAINTENANCE After use, check the tool to make sure that it is in good condition. [. . . ]