User manual RYOBI 500W TRIMMER / ROUTER TR50A

[. . . ] 10 Go into the printer menu and check to be sure that the printer is recognizing the newly installed option(s): a Press MENU repeatedly until MEDIA MENU appears on the display. c If you installed both the auxiliary tray and the HCF, press ITEM + until you see TRAY3 MEDIATYPE on the display. d If you do not see TRAY2 MEDIATYPE or TRAY3 MEDIATYPE, the printer is not properly attached to the connector on the HCF(/tray) and you need to lift the printer and reposition it. Phase 2: Load Paper For each tray: 1 Pull the tray out. [. . . ] d If you do not see TRAY2 MEDIATYPE or TRAY3 MEDIATYPE, the printer is not properly attached to the connector on the HCF(/tray) and you need to lift the printer and reposition it. Phase 2: Load Paper For each tray: 1 Pull the tray out. a If necessary, lift out the media indicator at the right end of the tray and reposition it to correspond with the media you will normally use in that tray. b Position the paper guides in the tray. 6 Grasp and lift the printer by the hand holds on the sides and back. c For legal size and larger media, position the brackets: (continued on back) 2 If loading paper, fan it. Phase 3: Activate the HCF in the Printer Driver Windows® PCL Driver 1 Click Start Settings Printers. 2 Right click the RYOBI C9200 or C9400 PCL printer icon, then click Printing Preferences (Windows 2000), Properties (Windows Me, 98, 95) or Document Defaults (Windows NT 4. 0). 4 Under Paper tray installed:, set the total number of trays installed (4 for printer + HCF or 5 for printer + HCF + auxiliary tray), then click OK. 5 Click OK, then close the Printers dialog box. ® ® 3 Place the print media in the tray. ! Be sure to keep the media below the PAPER FULL mark. 4 Gently push the tray back in. Windows PostScript® Driver 1 Click Start Settings Printers. 2 Right click the RYOBI C9200 or C9400 PostScript printer icon, then click Properties. 3 Click the Device Settings tab (Windows 2000 and NT 4. 0) or the Device Options tab (Windows Me, 98, 95). THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF ONE (1) YEAR. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. RYOBI DATA SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. Additional information on obtaining service under this Limited Warranty is available by contacting the Oki Data dealer from whom the product was purchased, by contacting Oki Data directly at 1-800RYOBI-DATA (U. S. However, the procedure for obtaining service may vary outside the continental United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. [. . . ] However, the procedure for obtaining service may vary outside the continental United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers, call 1-800-RYOBI-DATA (1-800-654-3282). Oki Data Service Depot Information UNITED STATES Oki Data Americas, Inc. [. . . ]