User manual RYOBI 250W BENCH DRILL PRESS 5 SPEED EDP2521L

[. . . ] It will do the job better and safer at the rate for which it was designed. Do not force the tool or attachment to do a job for which it was not designed. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating . [. . . ] Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself ro to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. IMPORTANT Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the tool to your nearest RYOBI AUTHORISED SERVICE CENTRE for repair. When servicing, use only identical Ryobi replacement parts. Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save this operator's manual and review frequently for continuing safe operation and instructing others who may use this tool. WARNING: The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. WARNING: Page 4 RULES FOR SAFE OPERATION LASER LIGHT. Class 2 laser product CAUTION: Use of controls or adjustments or performace of procedures other than those specified herein may result in hazardous radiation exposure. Laser type: Semiconductor Laser class: 2 Wave length: 650NM Power supply: 3V Laser power: < 1 mW For service personnel. Complies with AS2211. 1. 1997 as a Class 2 Laser. Warning: Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into the beam, please observe all safety rules as follows. The laser shall be used and maintained in accordance with the manufacturer's instructions. Never aim the beam at any person or an object other than the workpiece. The laser beam shall not be deliberately aimed at personnel and shall be prevented from being directed towards the eye of a person for longer than 0. 25s. Always ensure the laser beam is aimed at a sturdy workpiece without reflective surfaces, i. e. Bright shiny reflective sheet steel or the like is not suitable for laser use as the reflective surface could direct the beam back at the operator. Repairs must be carried out by authorised Ryobi service centre. Page 5 UNPACKING Carefully remove all parts from the shipping carton. Do not discard the packing materials until you have carefully inspected the machine, identified all loose parts, and satifactorily operated your tool. Examine all parts to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, do not attempt to plug in this tool or turn it on until the damaged or missing parts are obtained and installed correctly. [. . . ] Guarantee Conditions This guarantee only applies provided that the Product has been used in accordance with the manufacturers recommendations under normal use and reasonable care (in the opinion of the Company) and such guarantee does not cover damage, malfunction or failure resulting from misuse, neglect, abuse, or used for a purpose for which it was not designed or is not suited and no repairs, alterations or modifications have been attempted by other than an Authorised Service Agent. This guarantee will not apply if the tool is damaged by accident or if repairs arise from normal wear and tear. The Company accepts no additional liability pursuant to this guarantee for the costs of travelling or transportation of the Product or parts to and from the service dealer or agent - such costs are not included in this guarantee. Certain legislation, including the Trade Practices Act, 1974 (as amended) and other state and territorial laws give rights to the buyer and impose liability on the seller in certain circumstances. [. . . ]