User manual RYOBI 2200W ANGLE GRINDER 230MM EAG2023CN

[. . . ] Failure to comply can result in accidents involving fire, electric shock or serious personal injury. Save owners manual and review frequently for continuing safe operation and instructing others who may use this tool. The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. [. . . ] Spindle shaft ON/OFF switch 10. Wrench NOISE BUILD-UP Noise (sound pressure level) in the workplace can exceed 85 dB (A). In this case, sound insulation and hearing protection measures must be taken by the operator. The main handle can be set to any of three positions (0 and 90 degrees) right and left by pressing the rotary lock button (4) and turning. 11. Livetool IndicatorTM INSTRUCTIONS FOR SAFE HANDLING Never use the tool if its cover or any bolts or screws are missing. If the cover, bolts or screws have been removed, replace them prior to use. Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. The use of accessories or other than those recommended in this manual might present a hazard. REPLACEMENT PARTS : When servicing use only identical replacement parts. Do not use wheels having a maximum permissable speed below 6600 rpm. MAIN HANDLE AUXILIARY HANDLE (Fig. 1) The auxiliary side handle on this angle grinder houses the wheel lock nut wrench. To remove the wheel lock nut wrench from the auxiliary handle, pull it out by the two lugs on the wrench. When finished with the wrench, slide it back in to the auxiliary handle with the lugs facing out. The auxiliary handle (3) can be attached to either side of the gear box, or the upper part of the gear box. SWITCH To switch on the unit - use your index finger to press forward the safety lock (6) and then press the ON / OFF switch (5). To switch off the unit - just release the ON / OFF switch (5). ANGLE GRINDER SAFETY PRECAUTIONS Check that the speed marked on the grinding wheel is equal to or greater than the rated speed of the tool. Ensure that the dimensions of the grinding wheel are compatible with the tool and that the wheel fits the spindle. Grinding wheels must not be used for any operation other than grinding. Grinding wheels must be stored and handled with care in accordance with the manufacturer's instruction. [. . . ] It is recommended that you take this tool to a Ryobi Authorized Service Centre for a through cleaning and lubrication at least once a year. ALWAYS DISCONNECT THE POWER CORD FROM THE SOCKET BEFORE CHANGING REMOVABLE OR EXPENDABLE PARTS (GRINDING DISC, CUTTING DISC ETC), BEFORE LUBRICATING OR WORKING ON THE UNIT. MAINTENANCE STANDARD ACCESSORIES Aux. handle (3) Grinding wheel ( 1 ) Wrench (10) SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. To ensure safety and reliability, all repairs should be performed by an AUTHORIZED SERVICE CENTRE or other QUALIFIED SERVICE ORGANIZATION. [. . . ]