User manual RYOBI 18V ONE ROTARY HAMMER CRH1801G

[. . . ] Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. [. . . ] Use of the power tool for operations different from intended could result in a hazardous situation. Wear a face mask or dust mask if the drilling operation generates dust. INSTRUCTIONS FOR SAFE HANDLING BATTERY TOOL USE AND CARE Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Under abusive conditions, liquid may be ejected from the battery; avoid contact. This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they do not play with the appliance. Visitors should wear safety glasses and be kept a safe distance from the work area. SERVICE Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Make sure that the tool is only connected to the voltage marked on the name plate. Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES: The use of accessories or attachments other than those recommended in this manual might present a hazard. REPLACEMENT PARTS: When servicing use only identical replacement parts. SPECIFICATIONS Voltage No load speed Hammer blows (Blows per minute) Impact energy Maximum Drill Capacity: Wood Steel Concrete (Hammer drilling) Recommended hammer drilling range Bit Connection type Weight - not incl. battery pack BATTERY PACK (not included) BPL-1820 BPL-1815 CRH1801 ABP1801 ABP-1815 18 V 0-1000 min-1 0-4000 min-1 1. 5J 16 mm 13 mm 12 mm 4-12 mm SDS-plus 2. 2 Kg MODEL COMPATIBLE CHARGER (not included) BCL-1800 BCS618 BCL-1800 BCS618 ACR1800 260022029 SPECIAL SAFETY RULES Use the auxiliary handle supplied with the tool. Exposure to noise can cause hearing loss. 2 English OPERATION WARNING Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product. [. . . ] Note: When the selector is in center position, trigger switch is locked. FITTING AND CHANGING SDS BITS See Figure 6. This tool is equipped with an SDS-plus connection system. Clean the bit and grease it with machine grease before inserting it into the chuck (2). For hammer drilling, work only with protective glasses, hearing protection and the auxiliary handle. MAINTENANCE WARNING: When servicing, use only identical Ryobi replacement parts. [. . . ]