User manual RYOBI 18V ONE IMPACT DRIVER BID1821G

[. . . ] When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. 1 ELECTRICAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. [. . . ] This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Make sure that the tool is only connected to the voltage marked on the name plate. Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never lay a tool down before its moving parts have come to a complete stop. REPLACEMENT PARTS : When servicing use only identical replacement parts. CHARGER SAFETY Keep children and visitors away. Visitors should wear safety glasses and be kept a safe distance from This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they do not play with the appliance. This product will accept Ryobi One+ 18V lithium-ion battery packs and Ryobi One+ 18V nickel-cadmium battery packs. Other types of batteries may burst, causing personal injury and damage. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injuries to person. To reduce risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage and stress. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: 2 English CHARGER SAFETY a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. That extension cord is properly wired and in good electrical condition. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Do not disassemble charger; take it to a qualified serviceman when service or repair is required. To reduce risk of electric shock, unplug the charger from outlet before attempting any maintenance or cleaning. Do not touch uninsulated portion of output connector or uninsulated battery terminal. [. . . ] The drilling direction is reversed when the selector is to the right of the trigger switch. Setting the trigger switch in the OFF (center lock) position 4 English OPERATION DRIVING OR REMOVING SCREWS See Figures 5 - 6. Place the direction of rotation selector in the correct position for the operation. Place the bit on the screw head and slowly depress the trigger switch. As the screw is driven, impacting will begin. MAINTENANCE WARNING: When servicing, use only identical Ryobi replacement parts. [. . . ]