User manual RYOBI 14.4V COMPACT IMPACT DRILL LCDI14022

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RYOBI 14.4V COMPACT IMPACT DRILL LCDI14022. We hope that this RYOBI 14.4V COMPACT IMPACT DRILL LCDI14022 user guide will be useful to you.


RYOBI 14.4V COMPACT IMPACT DRILL LCDI14022 : Download the complete user guide (1209 Ko)

Manual abstract: user guide RYOBI 14.4V COMPACT IMPACT DRILL LCDI14022

Detailed instructions for use are in the User's Guide.

[. . . ] Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. [. . . ] Under some operating conditions, these built-in features may cause the battery and the tool it is powering to act differently from nickel-cadmium batteries. During some applications, the battery electronics may signal the battery to shut down, and cause the tool to stop running. To reset the battery and tool, release the trigger and resume normal operation. NOTE: To prevent further shut down of the battery, avoid forcing the tool. If releasing the trigger does not reset the battery and tool, the battery pack is depleted. If depleted, the battery pack will begin charging when placed on the lithium-ion charger. Lock the trigger switch by placing the rotation selector in the center position. Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool before beginning operation. WARNING Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. Lock the trigger switch by placing the rotation selector in the center position. Therefore, the switch should always be locked when not in use or carrying at your side. LCDI1402 BPL1414 OPERATION WARNING Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below: Drilling in all types of wood products (lumber, plywood, panelling, composition board, and hard board) Drilling in ceramics, plastics, fiberglass, and laminates Drilling in metals Driving screws Hammer drilling in brick, or other masonry 3 English OPERATION TRIGGER SWITCH See Figure 3. VARIABLE SPEED The variable speed trigger switch delivers higher speed and torque with increased trigger pressure and lower speed with decreased trigger pressure. NOTE: You might hear a whistling or ringing noise from the switch during use. The drill has a keyless chuck to tighten or release drill bits in the chuck jaws. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (release) the drill bit. [. . . ] The oil will prolong the life of the bit and increase the drilling action. If the bit jams in the workpiece or if the drill stalls, stop the tool immediately. Remove the bit from the workpiece and determine the reason for jamming. When the brake is functioning properly, sparks will be visible through the vent slots on the housing. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI 14.4V COMPACT IMPACT DRILL LCDI14022




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI 14.4V COMPACT IMPACT DRILL LCDI14022 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.