User manual RYOBI 120W VARIABLE SPEED SCROLL SAW 405MM WITH ROTARY TOOL KIT ESW1240RK

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RYOBI 120W VARIABLE SPEED SCROLL SAW 405MM WITH ROTARY TOOL KIT ESW1240RK. We hope that this RYOBI 120W VARIABLE SPEED SCROLL SAW 405MM WITH ROTARY TOOL KIT ESW1240RK user guide will be useful to you.


RYOBI 120W VARIABLE SPEED SCROLL SAW 405MM WITH ROTARY TOOL KIT ESW1240RK : Download the complete user guide (517 Ko)

Manual abstract: user guide RYOBI 120W VARIABLE SPEED SCROLL SAW 405MM WITH ROTARY TOOL KIT ESW1240RK

Detailed instructions for use are in the User's Guide.

[. . . ] OWNER'S OPERATION MANUAL 405mm VARIABLE SPEED SCROLL SAW WITH ACCESSORY KIT AND FLEXIBLE SHAFT MODEL ESW1240RK N197 THANK YOU FOR BUYING A RYOBI SCROLL SAW Your new scroll saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged trouble free performance. CAUTION: Carefully read through this entire owner's manual before using your SCROLL SAW. Pay close attention to the Rules for Safe Operation, Warnings and Cautions. [. . . ] 2) DEGREE SCALE BASIC SCROLL SAW OPERATIONS BLADES Your new scroll saw accepts 127mm pin type blades. Your saw is also equipped with blade adaptors that allow you to use a variety of 127mm plain end blades. WARNING: To prevent personal injury always disconnect the power cord from power source before changing blades or making adjustments. 4) Rotate the blade tension knob anti-clockwise to release blade tension. Remove table insert and remove blade from the inner upper and lower blade holders by pulling forward on blade and then lifting the blade through the access hole in the table. Slight downward pressure against the upper holder may be helpful when removing blade from upper holder. Look at the blade holders closely and notice the blade slots and pin recesses in the blade holders. The blade holders are made so you can position the blade for cutting from the front or from one side of the saw as shown. Cutting from the side of the saw will be necessary when your work piece exceeds 405mm in length. In order to cut, and avoid uncontrollable lifting of the workpiece, the teeth of the blade used on the scroll saw should always point downwards when installed. Install the blade while inserting one end of the blade through the access hole in the table and hook the blade pin in the pin recess in the lower blade holder. Slide the top blade pin into the pin recess of the inner upper blade holder. You may need to press down lightly on the upper blade holder to install the blade. Cutting from the side of the saw will be necessary when your workpiece exceeds 405mm in length. With the blade positioned for side cutting, the table must always remain in the 0° bevel position. WARNING: Do not attempt to cut a bevel with the blade positioned for side cutting. 9) Rotate the blade tension knob anti-clockwise to release blade tension. Remove table insert and remove blade from outer section of the upper and lower blade hold-ers by pulling forward and lifting the blade and adaptor through the access hole in the table. Slight downward pressure against the upper blade holder may be helpful when removing blade from upper blade holder. Install the blade while inserting one end of the blade and adaptor through the access hole in the table, and hooking the blade adaptor onto the outer section of the lower blade holder. Slide top adaptor onto pin recess between adaptor guard and outer section of the upper blade holder. You may need to press down lightly on the upper blade holder to install the blade. [. . . ] Remove the cover and mount the flexible shaft. (See Fig. 13) Insert the flexible shaft wrench in the hole of the handle to stop the rotation of the shaft. Turn the collet nut until the flexible shaft wrench engages the hole in the shaft. 14) Insert the bit into the collet to prevent the bit from coming out of the tool while in use. OPERATING THE FLEXIBLE SHAFT Follow these guidelines when operating the tool. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI 120W VARIABLE SPEED SCROLL SAW 405MM WITH ROTARY TOOL KIT ESW1240RK




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI 120W VARIABLE SPEED SCROLL SAW 405MM WITH ROTARY TOOL KIT ESW1240RK will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.